Anyone using a swing away jockey stand?

Is anyone using a swing away jockey stand 

the taller the better but had to be a swinging one 

 

wondering where you might have got it from?

Martins has them but hoping someone may have found a longer one 

 

cheers 


Posts: 1181

Date Joined: 10/06/09

 Got mine from truckline

Sat, 2019-10-12 08:24

 Got mine from truckline

____________________________________________________________________________

getting the bottom line final answer from a bunch of blokes that use false names and put smiley faces at the end of paragraphs is not the best place in the world to get the information you seek.

Posts: 42

Date Joined: 19/02/09

try this from Martins. You

Sat, 2019-10-12 21:05

try this from Martins. You just need to weld the flat bars where you need them. the tube extends from inside the main tube. The foot on the bottom is good too as the boat doesnt roll away but it is a problem to align sometimes but a shove makes it move[url=https://ibb.co/W3g1cZF]

pelagicyachts's picture

Posts: 952

Date Joined: 23/02/11

moylees is on the money,

Thu, 2019-10-17 08:55

if it si for a larger/heavier boat - moylees is on the money, these are the way to go
I had a swing away break - albeit the drawbar had slid forward putting too much weight forward - either way it was at Gnaraloo and a fkker to get the boat hooked up to the cruiser...

Posts: 42

Date Joined: 19/02/09

 notice the bottom leg is

Thu, 2019-10-17 19:57

 notice the bottom leg is only on the second hole. I think there are 5 or so more inside the sleeve. so if you really need the height to drain the boat put it on a brace and extend the leg again. Best one I have found so far.

black gen's picture

Posts: 665

Date Joined: 13/04/11

 Cheers all

Wed, 2019-10-23 06:17

 Cheers all