New Avet/Xyoga combo
Submitted by till on Tue, 2008-11-25 17:12
I just put together a new combo for 30lb. I got the Avet SX 6/4 MC for father's day and put it on a Xyoga built up by David from Seasons Rods, picked up from The Tackle Shack. Now I just need to blood it!
____________________________________________________________________________
.thumbnail.jpg "Sharkboat Jetline 2")
seasonsrods
Posts: 120
Date Joined: 08/05/08
Guess there is an up side
Guess there is an up side to being a father after all...
Glad you like the rod.
Cheers
till
Posts: 9358
Date Joined: 21/02/08
There are lots of upsides to
There are lots of upsides to being a father, often you just can't see them all at once =)
Blake.T.
Posts: 680
Date Joined: 12/12/07
very very nice combo, thats
very very nice combo, thats one of those combos that you think to yourself "geez i want one of these" hahaha.
Keep us posted on how it goes.
***********************************************************
The Tackle shack, for all your fishing needs.
Huge range of stock to suit any fisherperson.
PH:9248 3800, unit 3/11 Alexander Drive Malaga
Tim
Posts: 2497
Date Joined: 26/09/06
Nice Combo
Looks like a nice combo Till. Will be interested in what you think of the Avet.
** Rockingham Offshore Fishing Club **
Neander
Posts: 520
Date Joined: 23/10/07
Nice Rig till. Bet that
Nice Rig till.
Bet that would sound lovely screaming with a MaMiai on the end
Adamp
Posts: 152
Date Joined: 08/11/08
Nice combo even better once
Nice combo even better once you christen it. How much do the avet reels range from?
Adamp
till
Posts: 9358
Date Joined: 21/02/08
The avets have a bit of a
The avets have a bit of a patchy rep here, but I'm hoping the new silent retrieve model is a bit better. Its also a two speed, with cast control so they went all out with this model.
I had/have a saltist with 50lb on it, and its heavy enough to make smaller fish no fun, so I just wanted to get up something right on 30lb.
The Avet SX single is about $400 in aus now with the shoddy currency, no idea what the two speed version cost with magic cast cost, google says about $360US.
seasonsrods
Posts: 120
Date Joined: 08/05/08
Till, from my limited
Till, from my limited expereince with them is that the Avet's will need bit more TLC so just take care of it and service it as often as you can to protect the bearings and keep the drags clean and you should be ok.
Any one know if the new Avet's are using sealed bearing?? if it does that would have solved half the Avet's problems i rekon
Colin Hay
Posts: 10407
Date Joined: 23/10/07
That looks great Till
I would be interested in hearing how it goes as I have an Avet which I would like to pair up with my Xzoga rod.
(Colin 1 - Co-founding member of the prestigious Colin Club)
Moderator. Proud member of the Fishwrecked "Old Farts". Make sure your subscribed to Fishwrecked Reeltime http://fishwrecked-reeltime.com/
Big J
Posts: 129
Date Joined: 16/12/07
Nice combo, Ive got 2 Avet
Nice combo, Ive got 2 Avet SX (single speed) reels matched on a couple of Monster Mesh rods and love them.
Just picked an SX up last week for $250 locally
J
till
Posts: 9358
Date Joined: 21/02/08
The current avets have
The current avets have sealed bearings but irritatingly the drag washer is push fit, so to get it out to grease behind it would destroy it. My old SX 5.01 had brass gears, but the new one has stainless steel.
$250 is a good price locally for new ones, Todd's is about the cheapest I'm aware of online and a lot of other placed repriced high in a bit of a panic!
Zorba
Posts: 35
Date Joined: 24/09/08
Avet's
I've seen avet's with bent teeth on the gears and the crap spring on the anti reverse pawl,and the crap anti reverse pawl,and the crap bearings, not one of my favourite reels,they look nice and I hope you get a lot of use out of them,I doubt if you'll buy another.I used to repair reels,so would have seen more than the average bloke.
My Opinion.
till
Posts: 9358
Date Joined: 21/02/08
I had an older one and they
I had an older one and they have certainly improved over time.
seansurfy
Posts: 475
Date Joined: 09/08/06
Avet = meat grinder.... IMO
Avet = meat grinder....
IMO the best OH in this class would be the Saltiga Z20 or Z30.....great quality and beautifully machined