engine reccomendations?
hey guys.
despite the incoming ban, i am looking at potntially upgrading the boat to a carribean 2300, and will be wanting dual engines as spending more and more time remote and a long way off shore.
its been a while since i have been looking at engines and unfortunately missed the boat show as came down with the rona :/
was wondering what peoples current opinions are on best options/
my current rig has the 200hp merc and have been pretty happy, but if looking at the upgraded 350hp hull, then merc dont do a counter rotating so would end up heaps more expensive.
yamaha
look good, but havent had them before. this helm master thing looks interesting.
just wondering if anyone has any opnions, good or bad, or any other suggestions/ cost isnt too much of a factor as as far as im concerned the negnes need to be reliable or its just not fun any more, esp as the kids will be coming out more now.
anyway, thanks heaps for any advice!
wifecallsmegrumpy
Posts: 145
Date Joined: 09/01/12
What do you mean by mercury
What do you mean by mercury don't do a counter rotating so it would be more expensive ? I have seen a few boats with twin mercs 200's that I assume would have one engine propeller turning the opposite way to counteract the torque ? Or are you looking for single outboard with twin props like Suzuki's 350..
I do like the current merc's so that's how I would go.
Sea goat
Posts: 962
Date Joined: 26/03/17
i think it was the 175 that
i think it was the 175 that doesnt do it. so was told would have o tdo something with the gear box. dont think it was an issue with the 150, only if i wanted to go the upgraded hull and twin 175s. i also like the current mercs. just tossing up whetehr the extra hp is worth it or not.
Bodgy 79
Posts: 285
Date Joined: 04/08/22
There's twin 350 Verados for
There's twin 350 Verados for sale in Bunbury brand new,one is counter rotating
Sea goat
Posts: 962
Date Joined: 26/03/17
hahaha twin 350s would be a
hahaha twin 350s would be a sight! think they would sink the boat or make it fly!
Bodgy 79
Posts: 285
Date Joined: 04/08/22
I have a 200 merc coming on
I have a 200 merc coming on my new boat,same outboard as 175 just different software. Was only $1050 to go 175hp up to 200 hp
Rob H
Posts: 5796
Date Joined: 18/01/12
Merc dont do a counter in
Merc dont do a counter in 175, but the 200 is only about $800 each extra.
I have 2 sitting ready for my boat.
The 175, 200 and 225 are the same engine and the price was +800 for 200 and plus another $2K? for the 225.
I went for the 200's
Give a man a mask, and he'll show you his true face...
The older you get the more you realize that no one has a f++king clue what they're doing.
Everyone's just winging it.
Sea goat
Posts: 962
Date Joined: 26/03/17
unfortunately hull not rated
unfortunately hull not rated for twin 200s on the 2300. even with the hull upgrade. i currently have the 200 and has been a great engine.
wifecallsmegrumpy
Posts: 145
Date Joined: 09/01/12
Go the 150's I reckon max
Go the 150's I reckon max horse power is overrated as you never run that hard in WA. Well I don't anyway as it's always too rough.
If demersal fishing is (was) your thing I have to say that helm master system looks really cool, but I bet it's dear as poison. Love to have a spot lock !
Rob H
Posts: 5796
Date Joined: 18/01/12
the 150 Mercs are awesome
the 150 Mercs are awesome engines with great history now.
Only downside if can call it that is no digital controls or joy stick control options.
Give a man a mask, and he'll show you his true face...
The older you get the more you realize that no one has a f++king clue what they're doing.
Everyone's just winging it.
Shark1
Posts: 1086
Date Joined: 21/05/12
counter rotating is
counter rotating is overrated on small hulls using outboard
trim tabs makes up for it
happy to discuss this on phone - not gona type 3 hrs pm me
Yammie or suzi is my go to motors, nothing wrong with merc tho
Sea goat
Posts: 962
Date Joined: 26/03/17
just eltting you know, spoke
just eltting you know, spoke to the engine suppliers on the weekend, and apparently merc does now do a counter rotating engine in the 175hp range.
ended up gogin dual merc 175s as a bit lighter, and according to a few sources a bit quieter, seemt o have more torque etc. bit sad they dont have something like the helm master system, but that was gonna be a pretty big extra cost anyay!
after looking into it a bit, seems liek either merc or yamaha are a great choice, and prob a little bit comes down t personal preference and needs. dont think could go wrong with either really...
thanks for all the tips!
big john
Posts: 8749
Date Joined: 20/07/06
Helmmaster
Helmmaster sounds fantastic, I'm assuming the outboard 'jog's on the spot.
Cynic in me says it won't take long to hit the 100 hour service intervals if this is the case. $$$$
I've got a 175V6 Mercury, replaced a F150 Yamaha. Similar weight, shit load more grunt and about on par with fuel usage.
WA based manufacturer and supplier of premium leadhead jigs, fligs, bucktail jigs, 'bulletproof' soft plastic jig heads and XOS bullet jig heads.
Jigs available online in my web store!
Bodgy 79
Posts: 285
Date Joined: 04/08/22
Mercurys spot lock systems
Mercurys spot lock systems called skyhook digital anchor,I enquired about it and the guy suggested I should take a seat first $$$. Big minn kota sounds cheap
Sea goat
Posts: 962
Date Joined: 26/03/17
yeah indeed, and i think they
yeah indeed, and i think they are only for models above 200hp if im not mistaken. think they are significantly more expensive than the helmmaster.
Bodgy 79
Posts: 285
Date Joined: 04/08/22
Yeah 20k plus and that's to
Yeah 20k plus and that's to get started apparently
Faulkner Family
Posts: 18025
Date Joined: 11/03/08
Beware of the spot lock. With
Beware of the spot lock. With all the gear changes the motor does wears out parts quite fast. I know of 1 person that found out the hard way on its first service from new
RUSS and SANDY. A family that fishes together stays together