Evinrude oceanpro midsection problem.
Submitted by D2ky on Thu, 2014-08-07 23:58
Hi lads,
After recent fishing trip, when I wash down the boat, I found some crack kind of like a knock from inside ( as the photo ). I got no idea what had happen there. Can anyone let me know what causes that? Would that affect the function of the outboard?
Thanks in advance. Cheers
Ken
Image Upload:
Paul H
Posts: 2104
Date Joined: 18/01/07
hole is in the lower cover
hole is in the lower cover mount bracket - that's about where my knowledge stops.
You'd want to replace the cover but would need to know what caused it prior to doing that
Over to someone else
Youtube Channel - FishOnLine Productions
https://www.youtube.com/channel/UCbUVNa-ViyGm_FTDSv4Nqzg/videos
wangler
Posts: 607
Date Joined: 26/04/08
Is it an
inny or outy
Want to make someone mad... tell a lie! Want to get the world upset... tell the TRUTH !
Dougie
Starbug
Posts: 563
Date Joined: 27/08/09
It houses one of the lower
It houses one of the lower mounting rubbers. Pull the cover and replace the mount and cover.
Paul H
Posts: 2104
Date Joined: 18/01/07
Not much in there in the way
Not much in there in the way of parts to punch it out - cause - could it be weakened wall due to corrosion!!
Youtube Channel - FishOnLine Productions
https://www.youtube.com/channel/UCbUVNa-ViyGm_FTDSv4Nqzg/videos
Starbug
Posts: 563
Date Joined: 27/08/09
Something along the lines of
Something along the lines of this
http://www.crowleymarine.com/johnson-evinrude/parts/51140.cfm
D2ky
Posts: 40
Date Joined: 03/05/12
Cheers guys. I will give it
Cheers guys. I will give it a try to open it. And see what happen inside.
Paul H
Posts: 2104
Date Joined: 18/01/07
Why your at it I'd be
Why your at it I'd be replacing the anodes as well - they look like their pretty low/eaten, could prevent future corrosion issues
Youtube Channel - FishOnLine Productions
https://www.youtube.com/channel/UCbUVNa-ViyGm_FTDSv4Nqzg/videos