Installing a Furuno
Submitted by Jackfrost80 on Mon, 2015-10-19 07:44
What have you guys with Furunos done to pretty up and waterproof the hole in the dash where the power and transducer cables come up through?
____________________________________________________________________________
Officially off the Pies bandwagon
hooty
Posts: 198
Date Joined: 25/05/10
Correct size rubber grommet.
Correct size rubber grommet. Protects cables and minimises water entry.
hooty
Posts: 198
Date Joined: 25/05/10
Correct size rubber grommet.
Correct size rubber grommet. Protects cables and minimises water entry.
Jackfrost80
Posts: 8148
Date Joined: 07/05/12
Cheers bloke that was my
Cheers bloke that was my thought too and was going to sika the inside of the grommet also but was hoping there was something that looks a bit neater like the cable covers for passing the transducer cable through the transom
Officially off the Pies bandwagon
hooty
Posts: 198
Date Joined: 25/05/10
No problems. I don't use
No problems. I don't use cable covers except for transom because it = more holes in boat, less flex and an unnatural bend which can stress/ break wires.
dodgy
Posts: 4578
Date Joined: 01/02/10
Whitworths on Stirling
Whitworths on Stirling Highway have that type of stainless cover available in a couple of different sizes.
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
Jackfrost80
Posts: 8148
Date Joined: 07/05/12
Sweet now we're talking,
Sweet now we're talking, thanks mate
Officially off the Pies bandwagon
triggy
Posts: 128
Date Joined: 14/09/11
stainless cover with
stainless cover with sikaflex to keep it sealed
Bluedog
Posts: 251
Date Joined: 28/07/11
Plus one for the stainless
Plus one for the stainless covers.
Scotte
Posts: 1145
Date Joined: 07/12/06
Stainless cover and if you
Stainless cover and if you worried about water going back up the exit a bit of sikaflex.
Vinesh87
Posts: 2751
Date Joined: 02/04/11
Cable compression glands!
Cable compression glands!