Plate me up....please!
Submitted by Pete D on Mon, 2009-07-20 07:56
Any machinists out there that could help out?
I need to attach my dive torch to a flexible arm for my underwater video case.
After a stainless steel plate (about 50mm long) to be machined up which will slide (nice and tight) into the torch slot.
M6 bolt to be flush welded through plate. Also need a small grub screw.
Sketch;
This orange connector will be bolted to the plate. The connector then ‘snaps’ into the flexible line.
Pic;
Cheers Pete
scottnofish
Posts: 1621
Date Joined: 28/08/07
how thick does the plate
need to be i have a few bits around
Pete D
Posts: 1681
Date Joined: 07/06/07
About 6mm Neil. Can be up
About 6mm Neil. Can be up to 10ish, but would need the 45 degree chamfer, then vertical rise - milling machine?
Would bring the torch around - to get it exact.
Cheers Pete
scottnofish
Posts: 1621
Date Joined: 28/08/07
should be able to knock you up somthing
is that a m8 bolt
Pete D
Posts: 1681
Date Joined: 07/06/07
M6 mate. BTW, will need 2
M6 mate. BTW, will need 2 off these plates - is that pushing it!
Worth a fish - thinking Friday, can give you the torch body then.
Give us a call at work - or pm.
Cheers Pete
scottnofish
Posts: 1621
Date Joined: 28/08/07
no probs mate just dusted
off a peice off 6mm 316 from under the bench should be heaps for 2 can you drop them to me at work at western welding in howson way spearwood and a fish sounds good but i am busy for the next month im off to dirk hartog for a week on the 1st so got to keep in the good books with the misus until after that
Pete D
Posts: 1681
Date Joined: 07/06/07
Hmm, worth being in the good
Hmm, worth being in the good books for that trip!
What is the latest time this week for a drop off - in other words; beer o'clock time
Cheers Pete
scottnofish
Posts: 1621
Date Joined: 28/08/07
i finish at 4.00
every weekday
NOHA
Posts: 914
Date Joined: 24/06/07
Milling machine!!! You can
Milling machine!!! You can tell your an engineer Pete..
Angle grinder and a quick linish if your lucky
Twin turbo..V8 diesel..Ohh what a feeling!!
No Orange Hats Allowed
Pete D
Posts: 1681
Date Joined: 07/06/07
Don't insult me, I'm the
Don't insult me, I'm the smart one - a Designer.
As you know Mark, work would be done with a grinder, but charged for a mobile milling machine!
Should be down about 9.30 on Friday Neil. I'm staying in the good books too - taking the missus squidding
.
Cheers Pete
scottnofish
Posts: 1621
Date Joined: 28/08/07
no worries pete
and i didnt use a grider mark just the plasma and linisher .
when you get here pete just drive down to the back of the workshop where the gas is and come in
scottnofish
Posts: 1621
Date Joined: 28/08/07
how does that look
Tim
Posts: 2497
Date Joined: 26/09/06
Good
Looks good enough to keep even a picky designer happy Neil.
Ryan Thipthorp (not verified)
Posts: 16
Date Joined: 01/01/70
yep!
He's an engineer so plenty of money, dont hold back Neil........LOL
Looks the goods, will allow us to get some great U/W footage!
Pete D
Posts: 1681
Date Joined: 07/06/07
Looks the goods Neil. Will
Looks the goods Neil. Will the orange bit (diameter 30mm) fit on the left one - grub clash? Will try and get down tomorrow if I can scam a work car.
You'll keep Tim. Think I've said that a few times to you now too.
Settle down Ryse, I correct the engineers. I'm just a designer. Saved a few more lives last week from a bad engineering decision - waiting for that cheque too.
Cheers Pete
scottnofish
Posts: 1621
Date Joined: 28/08/07
yeh should do
i only thought about that afterwards so i made the grub screw flush i can move it over to the same as the one on the right if you want
Pete D
Posts: 1681
Date Joined: 07/06/07
Nah, she'll be right. As
Nah, she'll be right. As long as the grub can be turned, alls good.
Cheers Pete
NOHA
Posts: 914
Date Joined: 24/06/07
Red Emp
I gave Neil some fillets for you. Make sure you get them Pete when you pick up your parts
Twin turbo..V8 diesel..Ohh what a feeling!!
No Orange Hats Allowed
scottnofish
Posts: 1621
Date Joined: 28/08/07
there still in the frezzer
he snuck up on me at work today and i didnt bring them in
Pete D
Posts: 1681
Date Joined: 07/06/07
Doh! Squid tonight too and
Doh!
Squid tonight too and no fish to compliment.
We'll have to get out for a fish Mark, while Neil battles the strong winds at Steep(hope not).
Cheers Pete