Release weight
Submitted by turts on Tue, 2013-04-30 17:16
Hi guys quick question. I'm based in SA and looking at a release weight for the boat. Ray and Anne's used to stock them but I can no longer track them down anywhere here
i have seen some homemade versions but where abouts could I locate a proper moulded version that they would use out on the sambo charters etc. is there any site sponsors or online stockists to consider?
cheers in advance
kyle.desouza
Posts: 16
Date Joined: 04/10/12
Tackleworld
Tackleworld have them turts.
turts
Posts: 118
Date Joined: 16/09/09
Thanks mate
Thanks mate
grantarctic1
Posts: 2546
Date Joined: 03/03/11
Here is one
Here is one i made. After looking in the takle shop's and not being happy with the quality on offer , i made my own . ( it works great )
Basicly, i took a bit of alumium tube and filled it with molten lead with a S/Steel eye . Then used a split ring to add a large hook with the barb removed.
http://fishwrecked.com/forum/todays-sandies
Hope this helps, you could use a very large sinker the same way . Cheers Grant ..
grantarctic1
Posts: 2546
Date Joined: 03/03/11
PS
PS , i used a crimp on the hook to stop the swivel clip coming off .