Removal of cables from E-Tec. Help
Howdy Team,
As some of you may be aware, I have gutted and am rebuilding my Pacemaker (Pacemaker rebuild formally Foam Bilges. Pic heavy) and need to remove both the morse cables (gear and throttle) from my motor (as I need to replace them), and the power cables from my control box on the console (to run it all under the deck).
Not knowing enough about it, I don't want to stuff it up and am chasing the services of someone who has an idea of what they are doing.
Looking it, I hope it wont take too long though I lack the confidence to wing it.
If it is something someone can easily explain to me, I will give it a crack (if it is idiot proof) though if anyone is in the Thornlie (Canning Vale side) and knows what they are doing, I will pay for your time.
The motor is a 2010 Etec 75hp
Silver Fox
Posts: 1097
Date Joined: 19/06/14
Give it a go
If in doubt YouTube it ! Some hillbilly from Alabama will show you the way .... . It’s pretty straight forward, start from the motor and work your way backwards. Take lots of piccies , take your time and don’t try to force anything. If I can work on my boats and not kill myself im pretty sure you’ll have no problems !
My wife understands why I clean my rods n reels in the shower....
carnarvonite
Posts: 8627
Date Joined: 24/07/07
Google
Hit google, there is an online manual that you can download
Swompa
Posts: 3786
Date Joined: 14/10/12
Yeah I have spent an hour
Yeah I have spent an hour looking at that. You can almost hear the crickets...
Swompa
Posts: 3786
Date Joined: 14/10/12
Thanks for the
Thanks for the encouragement. Took this amature around an hour to pull it apart and put it back together again.
crano
Posts: 695
Date Joined: 04/11/09
Pro
Guess you are now a professional.
Swompa
Posts: 3786
Date Joined: 14/10/12
Fake it till you make it!
Fake it till you make it!