Trailer Question............
Submitted by terboz123 on Wed, 2015-11-11 11:38
Hey all...
dont have time to use the search function, till later but thought i would post this to get everyones opinion as a start....
The trailer i have imported has a width of 2.64m..... The standard for the AUS is 2.5m
Is it just the standard permit i need to apply through main roads? Or have i hit a road block here...?
Brett
____________________________________________________________________________
a hard days fishing still beats work
PGFC member
GCGFC member
scotto
Posts: 2470
Date Joined: 21/04/08
road block
new trailer required.
NORUN NOFUN
Posts: 1035
Date Joined: 15/08/11
Loads in excess of 2.5mtrs
Loads in excess of 2.5mtrs width can only be carried when a permit is issued by mains road WA.
That's straight out of my booklet I had sitting on my desk from Main roads WA.
Starbug
Posts: 563
Date Joined: 27/08/09
yes...... a show stopper
To register the trailer it must be 2.5m or less in width.
You can carry a over width load on a trailer with the appropriate permit.
wez0062
Posts: 334
Date Joined: 02/09/14
2.5mtr wide loads
I am sure you need a permit for that, every time you go out
Wez0062
Vinesh87
Posts: 2751
Date Joined: 02/04/11
Yeh as said above trailer
Yeh as said above trailer has to be under 2.5m. If the loads over 2.5 and under 2.7 its a permit and flags.
Can you decrease the width of the wheels archers/wheels/axels?
meglodon
Posts: 5981
Date Joined: 17/06/10
Permit required for each move
That's the bad news of it all.
bradz
Posts: 693
Date Joined: 29/10/07
Modify
Depending on the construction, you may be able to modify it. The guys at TowSafe in Osborne Park often do that, as do many other places.
May just need to shorten the axles, change the rims (maybe) and adjust the guards.
Give them a try.
I did then the best that I knew how. When I knew better, I did better.
Stevo81
Posts: 1278
Date Joined: 16/04/12
+1 for tow safe.Ask for
+1 for tow safe.
Ask for Roland. He is a full bottle on it and stocks all the US parts.
Good luck mate!
•••••••• Electrical Contractor NOR ••••••••
terboz123
Posts: 1358
Date Joined: 13/04/11
Yerh mate . What a disaster
Yerh mate . What a disaster eh....... I used tow safe back in the day there going to look at it today.....
a hard days fishing still beats work
PGFC member
GCGFC memberStarbug
Posts: 563
Date Joined: 27/08/09
Depending on how wide the
Depending on how wide the load is you can get a yearly permit. Around $75 I think..... someone will correct me.
Different levels of over width are subject to different requirements.
Luke
Posts: 167
Date Joined: 02/11/09
You cannot register a
You cannot register a trailer thats over 2.5m or move it unless its on a flatbed truck. A wide load is completely different again, you need a permit for that. Your importer should have gone through that with you? Hope you get her on the water soon! You might be able to get away with some different offset rims and taking the guards off?
Rob H
Posts: 5806
Date Joined: 18/01/12
the guys above are correct,
the guys above are correct, you cannot register it over 2.5M UNLESS its a piece of farm machinery like a header
Have you got import approval for the trailer, who is your shipping agent?
EDIT-have you already got it off the dock?
Give a man a mask, and he'll show you his true face...
The older you get the more you realize that no one has a f++king clue what they're doing.
Everyone's just winging it.
epic restos and...
Posts: 226
Date Joined: 22/06/15
see if you can mod it (could
see if you can mod it (could be as simple as just narrowing the gaurds) what is the width of the boat?
z00m
Posts: 1086
Date Joined: 10/05/14
Last I heard they don't
Last I heard they don't release trailers from customs unless they are Aussie compliant. Too many trailers went on to be registered without meeting the regs.
The towing permit for wide load now you can get 3 years for $50. You don't need a new permit for every towing event.
Vinesh87
Posts: 2751
Date Joined: 02/04/11
Haha not when i bought mine,
Haha not when i bought mine, towed it off the dock myself and too the closest carpark for some mods to get it home!
JohnF
Posts: 2838
Date Joined: 07/07/10
Trap for young players Brett.
Trap for young players Brett. The above is correct, trailer MUST be less than 2.5, then just $50 permit for 3 years for a 2.5 to 2.7 wide load on the -2.5 wide trailer.
Email send on permit stuff.
Boston Whaler 235 Conquest......getting the flogging it was built for.
Luke
Posts: 167
Date Joined: 02/11/09
Keep in mind the boats really
Keep in mind the boats really 2.74 wide, want to cover all bases!
terboz123
Posts: 1358
Date Joined: 13/04/11
Hey Hey well good news on
Hey Hey
well good news on the trailer...its repairable and we can bring in the width....
also have a bback up plan as well if all falls through!
.....
Keep all posted...
a hard days fishing still beats work
PGFC member
GCGFC memberDale
Posts: 7930
Date Joined: 13/09/05
Good to hear Brett, I was thinking you my have been stuffed with what you had.
"Just because you are a Character, Doesn't mean you have Character."
Mr Wolf
terboz123
Posts: 1358
Date Joined: 13/04/11
well trailer is booked in
well trailer is booked in for a week work in 2 weeks......when im back. Boat will be based at kailis marine in freo while I get the work done... $$ im pretty happy with. Wont destroy the wallet like first thought....
will get the boat and the pots out hopefully next saturday,.
a hard days fishing still beats work
PGFC member
GCGFC memberStevo81
Posts: 1278
Date Joined: 16/04/12
Good result then. You must
Good result then. You must be hanging to get her on the water mate!
•••••••• Electrical Contractor NOR ••••••••
terboz123
Posts: 1358
Date Joined: 13/04/11
will do next week just
will do next week
just installed a 295 with a 3kw 38hz and a ke 200hz.... HELLO DEEP DROP
a hard days fishing still beats work
PGFC member
GCGFC memberStevo81
Posts: 1278
Date Joined: 16/04/12
Nice one. Who did the
Nice one. Who did the install? I'm looking into upgrading tranny at the moment too
•••••••• Electrical Contractor NOR ••••••••
terboz123
Posts: 1358
Date Joined: 13/04/11
My marine mechanic who is
My marine mechanic who is good mates wit taylor marine...taylor marine came and looked at the boat etc etc.. my phones been up shit creek. For some reason your txt came threw on the my NZ number...... wierd huh
a hard days fishing still beats work
PGFC member
GCGFC memberRick
Posts: 1113
Date Joined: 22/12/06
nice
that will improve your chances of a feed. will look forward to a few sounder pics next month
PGFC Member
terboz123
Posts: 1358
Date Joined: 13/04/11
Mmmmm dhues n co are
Mmmmm dhues n co are easy........ Never deep dropped before so that will be the challenge
a hard days fishing still beats work
PGFC member
GCGFC memberterboz123
Posts: 1358
Date Joined: 13/04/11
Well shes finally
Well shes finally licensed.... Trailer, boat etc etc
Now its just time on the water unfortunately.. Donty see my self getting a crack at a fish till Mid to late January. Maybe if I am lucky down south in the first week of Jan.
JohnF i still got you....will get you to tag along on the maiden voyage mate for some demercals.
Terboz
a hard days fishing still beats work
PGFC member
GCGFC memberStevo81
Posts: 1278
Date Joined: 16/04/12
Great to hear mate! Catch ya
Great to hear mate! Catch ya on the water soon..
•••••••• Electrical Contractor NOR ••••••••