It's perfect for my use. On some of the bigger pots you need to make sure the bridle is right up to get the weight close to the pivot as possible but those tippers are great value with the full width roller and locking arm.
bought one of the alli tippers from jack several years ago at fishwise in zetta cresecent , it on my 5.5 aluminium barrington , it is light easy to use , has the wide roller , lock down arm , i only run full size steel base pro pots of margs and it handles them fine
Yeah still the same price just have to have the rod holders at correct centres. I got mine a fortnight ago and i got everything from him while i was there including s/s bolts and nylocs and even a tube of duralac which was really convenient not to have to run around at all installed it no time at all. He had plenty in stock when i was there.
i took my boat over to a local alli welder at marindi fabrications , they put 2 alli sleeves down into the gunwhale for the tipper to slide into as well as welded some extra strength alli tabs on where the capstan winch was going to be fitted , this added strength into the load areas under pull pressure when a pot is on the go
Contact Dror at CSD Designs, strong, well built tippers he can also install for you if needed, the guy is very fastidious about his work. He is however pretty busy so need you need to order them before you need it.
still trying
Posts: 1020
Date Joined: 27/06/17
I just got one from fishwise
I just got one from fishwise haven't used it yet but i think its great for my boat probably too small really for yours
rather be fishing
Darren253
Posts: 570
Date Joined: 23/07/16
I have a fishwise tipper on
I have a fishwise tipper on my 6.1m Reef Runner.
It's perfect for my use. On some of the bigger pots you need to make sure the bridle is right up to get the weight close to the pivot as possible but those tippers are great value with the full width roller and locking arm.
hezzy
Posts: 1519
Date Joined: 27/11/09
bought one of the alli
bought one of the alli tippers from jack several years ago at fishwise in zetta cresecent , it on my 5.5 aluminium barrington , it is light easy to use , has the wide roller , lock down arm , i only run full size steel base pro pots of margs and it handles them fine
well worth the $ at $480 ish from memory
hezzy
OFW 11
evil flourishes when good men do nothing
still trying
Posts: 1020
Date Joined: 27/06/17
Yeah still the same price
Yeah still the same price just have to have the rod holders at correct centres. I got mine a fortnight ago and i got everything from him while i was there including s/s bolts and nylocs and even a tube of duralac which was really convenient not to have to run around at all installed it no time at all. He had plenty in stock when i was there.
rather be fishing
hezzy
Posts: 1519
Date Joined: 27/11/09
i took my boat over to a
i took my boat over to a local alli welder at marindi fabrications , they put 2 alli sleeves down into the gunwhale for the tipper to slide into as well as welded some extra strength alli tabs on where the capstan winch was going to be fitted , this added strength into the load areas under pull pressure when a pot is on the go
hezzy
OFW 11
evil flourishes when good men do nothing
Sulo
Posts: 256
Date Joined: 13/08/11
Contact Dror at CSD Designs,
Contact Dror at CSD Designs, strong, well built tippers he can also install for you if needed, the guy is very fastidious about his work. He is however pretty busy so need you need to order them before you need it.
RobertMc
Posts: 326
Date Joined: 19/01/09
matt dance makes them up
matt dance makes them up mate, 0417997885