Deep drop sinkers
Submitted by Mattyb84 on Fri, 2014-09-19 16:43
Hey guys just wondering what ur using as sinkers past 400m. I've tried 90 mm PVC filled with concrete but seems to light for the size and getting caught up in the current. I recently change my cv joints and axels so I've cut them up and welded a hoop on them. Just after other people's thoughts as lead isn't exactly a cheap option any more. Hears a photo of what I'm trying to get down to cheers
____________________________________________________________________________
Pgfc member
Image Upload:
Deleted
Posts: 6265
Date Joined: 26/04/14
try angel iron, train tracks
try angel iron, train tracks thats what we used to use on cray boats with the set lines
scottnofish
Posts: 1621
Date Joined: 28/08/07
i use 50mm solid round bar
with about six inches of 4mm chain welded on top can cut it to what ever weight u need ,i use from 1kilo to 2.5 kilo lenghts. try sims or one of the scrap yards you can get a few meters for $20.00 and i found they where easyier and faster to cut with a 5 inch grinder with a 1.25mm disk than with a drop saw
Mattyb84
Posts: 388
Date Joined: 28/12/12
Yeh cheers guys new ther be
Yeh cheers guys new ther be a few ideas on hear. My cv joints should work a treat then just gotta get the wind to play the game
Pgfc member