forby snorkel
Submitted by caughtup on Tue, 2014-06-17 09:41
anyone got any info on where to go and get a snorkel fitted
got a quote from arb to fit a safari snorkel $740 on my st-x
can anyone share any advice on where abouts to go
.thumbnail.jpg "Bit hard to get the boat in at Port Headland today")
scano
Posts: 1247
Date Joined: 31/05/07
If you are somewhat handy
Buy a safari snorkel kit and fit it yourself
i did a few of them on new prado's through work. They come with the cutout template and all fitting instructions.
easy as really
Deleted
Posts: 6265
Date Joined: 26/04/14
got an iron man snorkell
got an iron man snorkell fitted to my collie recently if your interested could send u the details, joondalup area
Shark1
Posts: 1086
Date Joined: 21/05/12
As scano said. Safari and
As scano said. Safari and diy. A little ratchet spanner is the only "special" tool u gonna need from memory a size 12 and a 52 or 48 holesaw. Did mine on a stx about 3 years ago. The template makes it easy. Happy to give u a hand / use my tools for a slab. If u diy u lnow how well u repaint yhe cut edges and thers no swarf left in the panels to cause rust
dodgy
Posts: 4578
Date Joined: 01/02/10
52 holesaw? You mustn't need
52 holesaw? You mustn't need too much airflow.
I just put a safari on my hilux and used a 98mm
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
t bone
Posts: 351
Date Joined: 20/04/14
DIY
If ya got a nice shed space & basic tools, like they all saying. the templates make life a lot easier. I jsut put a 4" stainless snorkle and airbox on my patrol at home. "aquired" a mates nibbler for the day which makes life easy. Just make sure to paint the raw edges.. Measure 5 times, cut once :)
Ohhh, and limit the beer intake to only half the carton before drilling/cutting anything :)
Shark1
Posts: 1086
Date Joined: 21/05/12
As i said dodgy been a long
As i said dodgy been a long time ago. Yes was a 98 and smoothed a bit bigger with a pencil grinder