Handy tip - changing tyre on trailer
Submitted by jarrid on Sun, 2014-03-16 08:41
Hi, just thought I would pass on a handy tip I got from my brother for changing tyres on a dual axle trailer should you get a flat. I had a piece of hard timber cut at an angle which I can drive up on. When the front or rear (if reversed) tyre goes up on the timber it allows the other tyre to get off the ground enabling the change. My trailer has torsion suspension and you can see in the photo that there is still enough height. Would just be a case of making the timber up to suit. It is cut at 2:1 as 1:1 just pushed it along rather than allowing the trailer to drive up.
Much easier than jacking up. And I have another piece to go back to back with it if required.
Image Upload:
.thumbnail.JPG "Pinky")
Auslobster
Posts: 1901
Date Joined: 03/05/08
Good tip!
And probably safer than a jack too!
Vinesh87
Posts: 2751
Date Joined: 02/04/11
Yeh good tip. Kerbs work too
Yeh good tip. Kerbs work too if your metro!
sandbar
Posts: 704
Date Joined: 25/10/09
Bush mechanics, keep em
keep em coming. Thanks for the tip and Vinesh adding to it
Swompa
Posts: 3783
Date Joined: 14/10/12
KeepItSimpleStupid works
Keep
It
Simple
Stupid
works every time.
shonky
Posts: 203
Date Joined: 22/04/12
How about
A tree hugging anti drum line greenie, or would they just squash out flat like a turd?
This habit is getting expensive!