HELP - Joining Furuno 585 with Furuno GPS1650
Submitted by DBZ on Tue, 2012-08-07 15:10
I've just ordered a cord to join my 585 with an older Furuno GPS1650 so that i can mark ground more accurately by using the 585 'mark' button.
I was expecting an easy 'plug one end into 585 and other end into GPS' situation but have received a cord with one pluggable end and the other cut off with open ended wires. (see pic)
I havent been down to the boat to look at where these wires could be fitted yet but didnt want to get down there and not know how to get it on. It didnt come with any instructions so any help/tips/instructions from anyone who has fitted this previously would be much appreciated.
Thanks in advance.
Image Upload:
scottnofish
Posts: 1621
Date Joined: 28/08/07
you connect it to
the white ,black ,yellow, and green that are spare on the power cable http://www.furunousa.com/ProductDocuments/GP1650%20GP1650D%20Installation%20Manual%20M.pdf
http://www.furunousa.com/ProductDocuments/FCV585%20FCV620%20Operator's%20Manual%20G%20%201-7-11.pdf
connections are on page 36 of the 585 manual and on S1 of the gps manual
scottnofish
Posts: 1621
Date Joined: 28/08/07
you connect it to
the white ,black ,yellow, and green that are spare on the power cable http://www.furunousa.com/ProductDocuments/GP1650%20GP1650D%20Installation%20Manual%20M.pdf
http://www.furunousa.com/ProductDocuments/FCV585%20FCV620%20Operator's%20Manual%20G%20%201-7-11.pdf
connections are on page 36 of the 585 manual and on S1 of the gps manual
DBZ
Posts: 102
Date Joined: 05/02/11
Legend, thanks for the quick
Legend, thanks for the quick response.