Occy basics

Hi All

I'm just doing a bit of prep for the forthcoming cray season getting pots ready etc even tho its a while off. I was thinking that if i'm to go to the effort of pulling pots each morning I may as well give the Occy's a go too. Just looking for some tips, do you generally drop Occy Pots in the same area as cray pots, or are there some other features you might look for?

I usually drop Cray Pots in behind 3 mile off Ocean Reef.

Appreciate any help on this including prefered baits!

Cheers

Jarrod


Posts: 1321

Date Joined: 05/05/06

 I think ive seen an occy

Thu, 2016-07-21 13:14

 I think ive seen an occy pots dropped by the pros in 20metres.

Good luck

____________________________________________________________________________

Bend over

epic restos and marine's picture

Posts: 226

Date Joined: 22/06/15

 forget the sound unless you

Thu, 2016-07-21 22:31

 forget the sound unless you like pre pulled or stolen pots

____________________________________________________________________________

Posts: 6454

Date Joined: 08/08/11

 Thinking about the same

Fri, 2016-07-22 05:41

 Thinking about the same thing.  You going for the off the shelf occy trap or made at home pot?

____________________________________________________________________________

Fish! HARD!

Jackfrost80's picture

Posts: 8050

Date Joined: 07/05/12

If you go off the shelf my

Fri, 2016-07-22 06:27

If you go off the shelf my uncle says he had a couple stolen and now uses a tiny ball on a thin rope as a float and paints it blue and says he has to really look for it when he hits his marked spot. Hasn't had one stolen since. That's down Bouvard way though.

____________________________________________________________________________

Officially off the Pies bandwagon

little johnny's picture

Posts: 5330

Date Joined: 04/12/11

Better off

Fri, 2016-07-22 08:34

 With tyres. Drill holes where tyre use to sit on rim. Pull closed with big zippy ties. Cut side walls ( approx 1 foot long) don't remove. bend inwards ( inside tyre) this way you make 2 to 3 pots out off one .getting Occo out easy( use concentrate pool salt ( sea salt)diluted in bottle.2. To 3 drops on occy they fly out off pot .  Occy hate high salt content. Don't damage occy also doesn't harm environment . Good luck:):)

rigpig's picture

Posts: 507

Date Joined: 21/11/12

good one

Fri, 2016-07-22 08:53

Bloody good idea using a tyre. I think i might give this a crack myself..cheers mate

Posts: 6454

Date Joined: 08/08/11

 Can you put up some pics if

Fri, 2016-07-22 09:04

 Can you put up some pics if you have any made up?  You lost me a bit in the cutting and pushing inwards instructions.

____________________________________________________________________________

Fish! HARD!

rigpig's picture

Posts: 507

Date Joined: 21/11/12

cutting side wall

Fri, 2016-07-22 11:36

I think Little Johnny means by cutting the side wall and push the flap into the tyre it will act as a wall (I presume cable tie that as well) and if you do that three times you will have three separate compartments inside the one tyre giving you three occy pots.. That's my take on it..

Walfootrot's picture

Posts: 1386

Date Joined: 23/07/12

Yep that's how John does it,

Fri, 2016-07-22 12:17

Yep that's how John does it, big tyres 3 holes small ones 2,
cable tie the beads together so the only opening is the holes you make in the side wall

____________________________________________________________________________

More drum lines, kill the bloody sharks!

Posts: 6454

Date Joined: 08/08/11

 Holes in both side walls

Fri, 2016-07-22 12:23

 Holes in both side walls opposite each other so it doesnt matter which way up the try sits on the sea bed???

____________________________________________________________________________

Fish! HARD!

Jackfrost80's picture

Posts: 8050

Date Joined: 07/05/12

I reckon Chris Mayne would be

Fri, 2016-07-22 11:57

I reckon Chris Mayne would be able to help you out with advice on cutting and pushing inwards

____________________________________________________________________________

Officially off the Pies bandwagon

Posts: 108

Date Joined: 24/06/14

Would love a couple of pics

Fri, 2016-07-22 11:58

Would love a couple of pics of this setup.

Posts: 193

Date Joined: 17/01/12

 Randall, after reading this

Fri, 2016-07-22 11:02

 Randall, after reading this I dont think i'll be spending money on off the shelf gear. Would be great to see a pic of this tire idea!

Posts: 733

Date Joined: 22/08/12

Awesome idea gonna have a crack myself

Fri, 2016-07-22 11:21

Presume they gotta be weighted down bit like a cray pot otherwise they'll move with the swells what do you use ? a couple of bricks

420casts's picture

Posts: 280

Date Joined: 25/03/13

 Do you have to mark your

Fri, 2016-07-22 18:02

 Do you have to mark your lines with floats, and if so, how many pots per line ? I can only find info on trigger traps

____________________________________________________________________________

My YouTube channel, Fishing Rigs & How To's and more:

https://www.youtube.com/channel/UCr9kJWJYyoaOkHRDu1pxszg


@666percentfishing

 

Posts: 6454

Date Joined: 08/08/11

 Trigger traps need floats

Fri, 2016-07-22 19:48

 Trigger traps need floats and ID.  Pots that dont trap dont need to be marked.

____________________________________________________________________________

Fish! HARD!

little johnny's picture

Posts: 5330

Date Joined: 04/12/11

You do same

Fri, 2016-07-22 20:25

 For tyre traps . But if someone steals them big deal. Make new ones . Put pot id on them and hope for best. Nothing worse than throwing money away.