Pot tipper builder in Perth
Submitted by ranmar850 on Sat, 2019-02-02 18:36
I know, should be able to search this, but i click all I like on the Search function and nothing happens. So can people give me some names for fabricators who build a solid tipper. Needs to be strong enough for full size pro pots.
Alan James
Posts: 2246
Date Joined: 30/06/09
The search function doesn't work
hasn't for some time, or not for me anyway. I find the way around this is to enter your key words into the general address / search function (not fishwrecked) and also add the word fishwrecked. It found this:
http://fishwrecked.com/forum/cray-pot-tipper-4
petermac
Posts: 2946
Date Joined: 03/03/10
have a look
have a look at willys from bullet boats tipers he makes they are the go
aussiejoe
Posts: 93
Date Joined: 01/03/14
I can recommend Dror in Bayswater
Here is a link to is Gumtree ad:
https://www.gumtree.com.au/s-ad/bayswater/boat-accessories-parts/cray-pot-tippers/1091330684
shortfuse
Posts: 211
Date Joined: 02/01/12
Can highly recommend Dror
Can highly recommend Dror over in Bayswater, very well built tippers
Sulo
Posts: 256
Date Joined: 13/08/11
x 3 for Drors tippers full
x 3 for Drors tippers full size pro pots for many years now and no issues. Solid and very well built, can also install if you need as well.
Belly Fish
Posts: 499
Date Joined: 09/03/12
Dror did mine too
Top job...highly recommended
ranmar850
Posts: 2702
Date Joined: 12/08/12
Looks like he does a narrow roller?
Not a fan, they stress the winch hugely, down to stalling point, when the pot is nearly up and the narrow roller chokes down the pot bridle, being narrower than the attachment points on the bridle. . So you end up having to heave the pot over before it get all the way up to the pivot point. Went through this with my last tipper, modified it for a wider roller, but still not full width. Probably fine for light pots, or small pots with narrower bridles, but I run heavy full size pro pots.
I'll be in Perth this week, and for some weeks after, might keep looking around.
tot
Posts: 1163
Date Joined: 31/01/10
Yes
and that’s the way Willy does them as well.
I took mine back to him to mod which he was more than happy to do but I don’t think he actually uses them much, too busy building boats haha.
Reverse cycle a/c supply and install - Ducted and wall splits