Removing Steering Wheel

I have a manky looking steering wheel I would like to replace.

Its some kind of black poly type material I cant see a brand.

I can get the centre nut off thats fine but my problem is I cant seem to remove the steering wheel or anything any further than this. Below the wheel is like a raised cowling if that helps, I could take a photo.

Does it pull or knock off or does it screw thread off, if so which way would it thread off as I cant seem to budge it either way. ?

Or am I missing something ?

Cheers again.


Posts: 4578

Date Joined: 01/02/10

Will come off with a tap.

Wed, 2012-01-04 12:54

Will come off with a tap. Loosen the nut off so the surface of the nut is flush with the bolt. While pulling outwards on the wheel give the nut a hit with a hammer. Should free straight up. Don't lose the key.
Havin the nut still on will save the threads from getting damaged and stop the wheel from coming back and hitting you in the face.

____________________________________________________________________________

Does anyone know where the love of god goes, when the waves turn the minutes to hours?

Posts: 361

Date Joined: 09/08/09

Have a read here.

Wed, 2012-01-04 12:56
Ryan C's picture

Posts: 1575

Date Joined: 08/07/10

STEERING WHEEL REMOVAL

Wed, 2012-01-04 13:24

hi mate , i can understand your frustration steering wheels can be a bastard to remove normally grab the wheel on each side and 'rock' it from side to side while pulling it as hard as you can , it will come off eventually.   cheers

Alan James's picture

Posts: 2227

Date Joined: 30/06/09

If all else fails

Wed, 2012-01-04 16:37

send Southcity 104 a pm.  Word has it he has no trouble getting them off. 

____________________________________________________________________________