Through Hull Transducer
Submitted by Jackfrost80 on Sun, 2020-12-27 19:56
I've had to remove my fuel tank to repair a split around the intake and have a one off opportunity to get access to the hull through the tank recess to install a through hull transducer.
I have a P66 that reads at 33knots but not as well when it's choppy with a broken picture so would it be worth installing a B60 for $500+ supply and install or would the results be negligible?
____________________________________________________________________________
Officially off the Pies bandwagon
Image Upload:
.thumbnail.JPG "Rough night ahead on the mooring")
Tim
Posts: 2497
Date Joined: 26/09/06
No
No gaurantee that the B60 wont break up in the chop either.
If you do it I would be taking the opportunity to put in a 1kw otherwise the P66 is a pretty good unit that will cover your needs out past 100m
Silver Fox
Posts: 1111
Date Joined: 19/06/14
If you can do it, do it Frosty.
I'd be jumping up to a 1kw if I was you.
My wife understands why I clean my rods n reels in the shower....
Jackalchub
Posts: 599
Date Joined: 10/03/12
1kw all day
1kw all day. Providing you can remove the fuel tank to access it in the future.. seal it well
Brock O
Posts: 3223
Date Joined: 11/01/08
You can install the P66 as
You can install the P66 as throw hull (dry).....did it with mine 8 months ago still going.
dale 308
Posts: 156
Date Joined: 06/04/12
How did you do that
How did you do that
Jackfrost80
Posts: 8141
Date Joined: 07/05/12
Cheers guys, sounds like it's
Cheers guys, sounds like it's go 1kw or don't bother especially as I'd have to remove the tank again if I get a leak
Officially off the Pies bandwagon
Jackalchub
Posts: 599
Date Joined: 10/03/12
Tm260 do the job and save
Tm260 do the job and save hassles.. get a drop down pole for deep