27mhz to VHF

 I'm looking to swap my 27mhz radio out for a VHF system. I have a GME base and aerial:-

https://www.gme.net.au/catalogue/antennas/antenna-mounting-hardware/abl014b.aspx

The base has 27mhz stamped on it, but it looks like I can just buy a new Aerial and reuse this base which will save a whole load of work - does anyone know a reason that won't work? 

Thanks!


Daryn


paul d's picture

Posts: 252

Date Joined: 16/03/13

 No problems , me and a mate

Tue, 2020-03-03 13:25

 No problems , me and a mate have just done the same. Works perfectly

Daryn's picture

Posts: 161

Date Joined: 01/05/12

 Legend, thanks!

Tue, 2020-03-03 14:32

 Legend, thanks!

scubafish's picture

Posts: 949

Date Joined: 15/08/12

Just suggestion

Wed, 2020-03-04 09:35

Leave the 27 meg in the boat as a backup.

____________________________________________________________________________

http://img.gg/BQ91Sys

dmck's picture

Posts: 405

Date Joined: 07/03/19

THen he will need....

Wed, 2020-03-04 13:01

 2 aerials.....

Daryn's picture

Posts: 161

Date Joined: 01/05/12

The running of cables is the

Wed, 2020-03-04 13:41

The running of cables is the big issue here. Everything is routed through some small holes to get from the console up into the Rocket Launchers. Looking at it I think there would be recrimping of the connectors required to fit it, which would take it out of my league and then will become an expensive job 8)

I'm also not sure if there would be room for more cabling without enlarging holes, which then means rerunning all the cabling for lighting as well. PIA!

 

 

Posts: 4562

Date Joined: 01/02/10

 Use the old cable as a draw

Wed, 2020-03-04 14:14

 Use the old cable as a draw wire for the new one. 

____________________________________________________________________________

Does anyone know where the love of god goes, when the waves turn the minutes to hours?

Daryn's picture

Posts: 161

Date Joined: 01/05/12

 The holes are too small for

Wed, 2020-03-04 15:06

The holes are too small for the connectors  -  not as easy as just pulling cables through.

I'll live with a single VHF unit - I lived with a single 27mhz radio without thinking about it for long enough.

Thanks all - time to go buy a new radio.

 

Posts: 4562

Date Joined: 01/02/10

 The outer section of the

Wed, 2020-03-04 16:13

 The outer section of the cable fitting usually unscrews to give a much smaller profile for this exact reason. 

____________________________________________________________________________

Does anyone know where the love of god goes, when the waves turn the minutes to hours?