295 with transom mount transducer
Submitted by Chook1204 on Tue, 2017-01-24 08:09
hi guys I'm looking at upgrading to a 295 and I'm going to have a transom mount transducer , I want to put a 2/3kw on a drop down pole,what are the recommendations for which transducer to use?I'm hoping to use a 28 or 38khz any suggestions or experience as to who is recommended to fabricate the pole would be much apprecaited
scottnofish
Posts: 1617
Date Joined: 28/08/07
fcv 295 oly goes down to 38 khz
the fcv1195 will go down to 28 kHz ,you might want to check the sizes of 2/3 kw trannys they are not small
Chook1204
Posts: 50
Date Joined: 20/08/12
Thanks Scott, yes I realize
Thanks Scott, yes I realize they aren't small, which is why I want the drop down pole set up to only use once out deep going slow
resurgence
Posts: 573
Date Joined: 23/04/14
Transom mounts
Tim (user here on FW) has a 295 with a 2kw 38 in a transom mount. He can give you details.
Ben Punch at Fibrelite Boats did Tim's transom fairing block and is experienced with these sorts of installations.
Chook1204
Posts: 50
Date Joined: 20/08/12
Cheers mate I will hit him
Cheers mate I will hit him up about it, thanks heaps
reece
Posts: 522
Date Joined: 10/07/08
I'm putting a 295 with 2x
I'm putting a 295 with 2x 2kw tranies in my new boat now. Getting Ben punch to make the moulds
Any one free to help me pull my drum lines tomorrow?
Gray
Posts: 140
Date Joined: 10/02/11
Hey reeceHave you still got
Hey reece
Have you still got the cat?
Whats the new rig?