Detecting fish in 100+m
Submitted by BarraSlayer on Thu, 2016-02-25 21:19
Got Hds 12 gen2 woth 600w 50/200khz Going deeper now, like 120m and picks up bottom well but hard to see fish anyone got any suggestions on what setting i.e 50 khz or 200 khz. Things to tune the fish?
____________________________________________________________________________
Cheers
BarraSlayer
tiimmbo
Posts: 695
Date Joined: 16/08/09
There are 2 different types
There are 2 different types of lowrance transducer that look similar but one is for deeper water (HSTDFSBL) - it is also a bit bigger than the standard (HSTWSBL). The bigger transducer for deeper water should pick up ground and fish in 120m easy, I had mine picking up fish in 220m on the move a couple weeks ago. All my settings were on auto as well.
sandbar
Posts: 704
Date Joined: 25/10/09
50khz
is for deep water.
BarraSlayer
Posts: 287
Date Joined: 14/04/14
Cheers guys
Cheers guys
Cheers
BarraSlayer
BarraSlayer
Posts: 287
Date Joined: 14/04/14
TM260
Hey Guys,
Do any of you use the TM260 1kw with your hds gen2? Are they any good in the deeper water and worth the coin?
My 600w one works well upto 55m, reads bottom well deeper but fish low in the water column is a waste of time and I give up.
Will the transom mount sounder affect boat handling in a 6m ali boat?
CH Smith suggested I should get a simrad and bms or something but dont have enough $ to replace the sounder too.
Cheers
BARRA
Cheers
BarraSlayer
t bone
Posts: 351
Date Joined: 20/04/14
simrad and BSM
hey man, im running a simrad as well as the HDS10.. from my understanding the only reason your going to need the BSM box is to give you better ability to get the most out of ya bigger wattages transducers.
im running a TM275LH-w (1kw) on the back of my 7.3 and notice no difference to the handeling at all.
BarraSlayer
Posts: 287
Date Joined: 14/04/14
Thanks TBone
Thanks TBone
Cheers
BarraSlayer
t bone
Posts: 351
Date Joined: 20/04/14
Home time
I start flying home for break tonight and plan on spending a bit of time over the next month out wide. Ill try get some screenshots and send thru to you if ya want to have a bit of a look :)
BarraSlayer
Posts: 287
Date Joined: 14/04/14
That would be good mate... i
That would be good mate... i emed up ordering a furuno 588 but going to keep the skimer and structure scan on the hds gen opposite side
Cheers
BarraSlayer