Hydrive Comkit sport
Submitted by Swompa on Mon, 2018-11-26 19:48
If anyone has one of these kits, are you able to measure the diameter of the black cylinder, please?
I have 15mm between the transom and an extended centre point of where the ram will end. Not sure I have enough space.
Image Upload:
scubafish
Posts: 949
Date Joined: 15/08/12
hyd steering
I fitted this one as it is more central and bolted to the outboard better.
https://www.marinesteeringandwinches.com.au/shop/hydrive-commander-outboard-kit-5/
http://img.gg/BQ91Sys
Swompa
Posts: 3783
Date Joined: 14/10/12
Spoke to the local bloke
Spoke to the local bloke today and he has suggested the same. I guess it will mean less holes in my boat.
scubafish
Posts: 949
Date Joined: 15/08/12
Steering
You might find the hyd line is a bit stiff out of the box ,I think he suggested to leave it in the sun for a while to soften it up.
http://img.gg/BQ91Sys
Swompa
Posts: 3783
Date Joined: 14/10/12
Thanks for that! 30 + degrees
Thanks for that! 30 + degrees on Monday should do the trick then.
Swompa
Posts: 3783
Date Joined: 14/10/12
Got the kit today. Bit
Got the kit today. Bit overwhelming at first glance but there is a good vid on YouTube which seems to explain things well.