Milky Slime through prop?

I have just purchased a second hand Tohatsu 9.8 2 stroke. Its only done 1-2 hrs and has never been in the water ( so i am told and it certainly looks that way)

It is still in its run in period running 25:1

 

It runs perfectly ( with no load just on the stand) but when i stopped it the first time there was a bit of a Milky/ Cream slime come out of the Propeller ( say a tea spoon) that came out of the exhaust.

So flushed the lower leg oil ( it was already perfectly clean) cleaned the slime out of the prop and ran it a few times and it seemed to get less and less every time after i cleaned it.

 

So my question is what is it? and i should i be worried or is it something to do with the run in ?

Some suggestions on the net include:

 

Water in lower leg ( which i have discounted)

Old fogging oil

Cracked head

Any more ?

 

Cheers

Vinnie


wangler's picture

Posts: 607

Date Joined: 26/04/08

leaking prop shaft seal

Tue, 2013-09-17 17:58

leaking prop shaft seal

____________________________________________________________________________

Want to make someone mad... tell a lie! Want to get the world upset... tell the TRUTH !

Dougie

Vinesh87's picture

Posts: 2751

Date Joined: 02/04/11

Ah yeh!Dougie that was the

Tue, 2013-09-17 18:03

Ah yeh!

Dougie that was the other thing i read. Will get it serviced.

 

Cheers

scottnofish's picture

Posts: 1621

Date Joined: 28/08/07

could just be excesive

Tue, 2013-09-17 18:23

  2stroke oil mixing with water in the exhaust jacket as your running it so rich ,my little 9 hp dose the same if i run it richer than 50/1

Vinesh87's picture

Posts: 2751

Date Joined: 02/04/11

Well thats what i first

Tue, 2013-09-17 18:28

Well thats what i first thought. Just not sure and i dont wanna drop the oil to 50:1 until ive done the hrs. Either way could be causing damage!

 

 

Simon C's picture

Posts: 801

Date Joined: 01/05/07

Lean it out.

Wed, 2013-09-18 07:23

 It's run in - if you are using good quality premix oil then u certainly wouldn't worry about leaning it out after a few hours. Think about how many times that piston has cycled in just 2 hours.

Posts: 633

Date Joined: 19/10/11

i run every think at 50 to 1

Wed, 2013-09-18 09:27

i run every think at 50 to 1 even if new or old, never had any dramas yet

Vinesh87's picture

Posts: 2751

Date Joined: 02/04/11

 Yeh will lean it off a

Wed, 2013-09-18 10:27

 Yeh will lean it off a bit.

Apparently it has been there since new but never used apart from on the stand!

 

 

 

I think its getting less !