Sonar stopped
Submitted by dakka on Wed, 2020-04-08 20:14
Hey all
i went out after work to drop craypots out for Easter. I have just recently bought a hook reveal 7 triple shot and this is the first time I have used it, when going onto sonar page it says stopped and is not showing anything at all, I downloaded the manual when I got home but it did not really help me, so is anyone able to enlighten me on how to get sonar on this unit, am going back out Friday to check pots hopefully can get it sorted cheers.
Dakka
____________________________________________________________________________
"If we all fish for the future now there will be fish in the future"
scubafish
Posts: 962
Date Joined: 15/08/12
try
A cold reset.
Not a lot of info ,does every thing else work?
Power OK ?
cables connected ?
side scan work ?
http://img.gg/BQ91Sys
Mark_M
Posts: 176
Date Joined: 10/04/15
Try here
https://www.justanswer.com/sip/lowrance?r=ppc|ga|1|General%20-%20Rest%20of%20World%20-%20Search|Lowrance&JPKW=lowrance&JPDC=S&JPST=&JPAD=169579334280&JPMT=p&JPNW=g&JPAF=txt&JPCD=20161227&JPRC=1&JPOP=ETA_V2&r=ppc|ga|1|||&JPKW=lowrance&JPDC=S&JPST=&JPAD=169579334280&JPMT=p&JPNW=g&JPAF=txt&JPRC=1&JPCD=&JPOP=&cmpid=17685483&agid=1212947733&fiid=&tgtid=kwd-139123624&ntw=g&dvc=c&gclid=EAIaIQobChMI8pvmoY_a6AIVhZOPCh1AdA6FEAMYASAAEgL-3vD_BwE
Jim
Posts: 1334
Date Joined: 05/05/06
It might just be turned off?
It might just be turned off? it has a cross thru it if turned off. press enter to turn it on I think. Also, from memory i think you have to select the correct transducer when setting it up.
try take the plug out and put it back in.
Bend over
dakka
Posts: 275
Date Joined: 05/03/06
Cheers guysall good it was
Cheers guys
all good it was turned off on main screen every thing works fine but an issue now is no depth comes up on the sonar screen got to keep looking for a solution for that now.
"If we all fish for the future now there will be fish in the future"
Jim
Posts: 1334
Date Joined: 05/05/06
I had issues with depth and
I had issues with depth and to fix it I either put it in auto depth or kept changing depth from the shallowest to deepest setting and then the depth you need it at. bit of a pain but it fixed it.
Bend over
Jim
Posts: 1334
Date Joined: 05/05/06
.
.
Bend over