urgent: wheel bearing
Submitted by Bruce on Wed, 2014-01-22 06:44
Blown a wheel bearing and need replacement urgently. Anyone know someone who can replace it like a trailer mechanic in Busselton. Need it fixed urgently!
Cheers
Shark B8
Posts: 152
Date Joined: 10/01/13
Hey Bruce do you have time
Hey Bruce do you have time to do it your self it is fairly easy.
Might save you a few bucks
Go big or go home..
Bruce
Posts: 527
Date Joined: 11/04/12
I'm actually on holidays
I'm actually on holidays just got down here from Perth got no idea what I'm doing :( the whole cap has come off and grease is all over the wheel, plus it is on an angle too.
doublej
Posts: 169
Date Joined: 08/07/09
Pretty easy
Just You Tube if your not sure.
scubafish
Posts: 962
Date Joined: 15/08/12
Wheel bearing
DIY ,it's easy
http://img.gg/BQ91Sys
mrwinta
Posts: 457
Date Joined: 14/01/10
DIY....
its easy but you need to make sure the bearings are packed with the correct grease properly or they will just over heat and disintigrate..... If you can't 'thumb' the grease into the bearing then get a polythene bag and add a good glob of grease and the bearing to the bag, squeeze the air out then twist the top of the bag and work the grease into the bearing....
As the other guys said you tube it and learn as the next time a bearing collapses it could be very remote and you will have to do it by yourself....
I hope you get it sorted...
NEVER PUSH YOUR GRANNY WHEN SHE'S SHAVING
unhurry
Posts: 236
Date Joined: 23/10/12
disagree guys
I have yet to replace my boat trailer wheel bearings DIY - and yes I have 'tubed the procedure several times but I do not have the right tool to knock the races out.
Anyhow - point taken that each boatie should be able to do this job ...
to the question Bruce - tray calling mobile mechanic on 97533243
scottnofish
Posts: 1621
Date Joined: 28/08/07
what you dont have
a large flat blade screw driver a shifting spanner and a hammer ,everyone should at least carry a basic tool kit.I carry 2 spare hubs 4 sets of bearings as a minimum and usally have 1 hub packed with grease ready to just swap straight over,they are only about $30.00 new
unhurry
Posts: 236
Date Joined: 23/10/12
hub
Hey scottnofish, thanks for the info, just a query: the hub packed with grease for $30 - does that include bearings? I am presuming that it is the bearings that usually kaak it, not the hub itself?
Thanks again
Bruce
Posts: 527
Date Joined: 11/04/12
Luckily took it to Tyre
Luckily took it to Tyre Power, they are going to sort it out. Looks like its stuffed pretty bad, needs a new axle and a few other things. Ended up unloading the ski onto some foam on the floor and just took the trailer incase the wheel fell off. Definetly not a DIY job. Wonder how much it will cost...
Cheers all