jig hook setup

jig hook setup

____________________________________________________________________________

 

 OFW member 088 

 Sponsored by no one and I work for myself so my comments are my own.


SPESS's picture

Posts: 3356

Date Joined: 29/12/06

I use black magic 400lb on

Thu, 2007-10-18 11:53

I use black magic 400lb on jigs 300gms and above and 200lbs on 200gms and below.

Keep it tight, reeeeeeel tight!

Posts: 23

Date Joined: 01/01/70

for me

Thu, 2007-10-18 12:51

Yeh i use the Owner solid rings to attach the swinging assist hook but use ballbearing swivels, they work alot better and i hardly loose a jig so no issue on paying a bit extra. As for the sizing, 100g jigs i use size #3...... 200g size #4........ and 300g plus i use #5 ball bearing!

*Oceanside-Strudwick,Daiwa,Van Staal,Jigmaster Rods, Banax,Shimano,Penn,Furuno*

Owner/Operator Oceanside Tackle and Marine
364 South Street, O'Connor, Perth WA
Ph# 9337 5682 ** OPEN 7 DAYS *

Maverick's picture

Posts: 1235

Date Joined: 06/06/06

4&5

Thu, 2007-10-18 18:15

Size 4 & 5 mainly , we don't want any failures when fishing PE8 & a full drag.

Someone asked me how we do the  hook swivel ring set up so I got a close up of a jig all set ready to go , this way you tie the line onto your swivel then you can change the jig or the hook as long as you have some good split ring pliers on hand , just about all my fishing is done with a swivel and ring on a leader then just whack on anything you want bottom rig , jig , trolling lure anything,  much better and stronger than a snap swivel.

JMHO

____________________________________________________________________________

 

 OFW member 088 

 Sponsored by no one and I work for myself so my comments are my own.

big john's picture

Posts: 8725

Date Joined: 20/07/06

Personally don't like using

Thu, 2007-10-18 19:14

Personally don't like using clips myself, just one more thing that can go wrong. But that's just me.

Only time I use clips is when trolling for billfish and want to be able to chance lure/leader setups or prerigged gars etc.

John

____________________________________________________________________________

WA based manufacturer and supplier of premium leadhead jigs, fligs, bucktail jigs, 'bulletproof' soft plastic jig heads and XOS bullet jig heads.

Jigs available online in my web store!