Gday guys going on a boys fishing trip with the boat to juriem in a couple of weeks. No doubt we will lose a day or 2 of boating cause of wind/waves. Any advice on where we can go landbased for a few tailor, herring or maybe a mulla. We will have 2 4WD's. I though i read in the past Hill river is worth a fish? is there anywhere else worth a go? even up around green head or  leeman cheers dave

I've reverted to including more monofilament line in my armament.

The obvious benefit of braid is longer casts and more line spooled. Plus no stretch if that's what you want.

But I've assembled a 12lb and 20lb outfit. Using Berkley trilene, $13 for 1000m.

The 12lb can cast metal lures and stick baits far enough, maybe 75-85% that of braid. Admittedly the reel and rod are very well balanced and the lures are 30-50 grams.

Then the 20lb setup has been able to pull in big, 10-15kg stingrays. Whilst hunting mulloway.

So what are the pros?

1. 2-5x cheaper

2. Far less wind knots

3. More abrasion resistant. I find braid can "ping".

4. Doesn't fray from casting. I find braid thins after many many casts spinning for tailor and salmon.

5. Also if you are lobbing out 4oz sinkers and half a herring, does braid really matter? I think it adds 4-5m more distance.

 
Enjoy 

 Fishos pulled from the water out off rotto area today 

 hey everyone just got back from the gassy and had a ball chasing spangos again.. was wondering if anyone has tips with rigs fishing over reefs? was using the old ball sinker rigs with hoodlum hooks and found that to help with not getting snags as mutch

anyone have any tips for fishing shallow water stuff on reefs. im all ears to stop losing gear haaha. on a side note heaps of 45 50cm ones and got railed by a pb would have been 70 had it jumping out the water. (gives you a tip on how shallow i was fishing) all great fun on the old alvey haha

14+ months is absolute bullshit. It's already hard enough trying to launch NoR for >$10 a pop and I already don't bother over Xmas anymore. Time to start heading down to Woodies and finding some new ground.

Will have my boat down south in Dunns from 4th to 11th, aside from trips with the family I'll be hoping to go out wide and make the most of weather windows.
if you're in the area and keen to head out shoot me a PM
6.5m Evolution Apex

Pretty happy with fuel usage .112 ks 61 litres. Wife got 2 nice dhues , and pink. I dropped some good fish and landed a blue. My swifty gone now. Been with me a long time.anyway such as life.

 Hey Crew

Anyone in or just been to Coral Bay? Headed up in a cpl of weeks..just touching base to see if sharks are manageable etc. 

Also, any FW members got any tips on where to get Occys in CB- need something to do in the spare time. Im thinking the cliffs with shallow reefs 5-10 kms south would be a good start on a low tide?

Heard the squid are in good numbers too in the normal Five fingers area

thanks

I'm talking North Beach area, from the MAAC club to Trigg. For tailor.

Also chuck Iluka and Burns beach in the mix.

In theory all the structure and reef should produce. But the only time I get tailor is when I fish on the sandy/southern side of Trigg. Once a 62cm model.
throwing lures around Marmion reef has caught me more wrasse than tailor.

Does anyone else share this view?
 

 Hi all, was pondering heading up to Exmouth for a spot of camping and shore based fishing. Never been before. Looking at free campsites and areas to fish. Prefer on beach campsites for four or five days. Any hints, tips or suggestions would be great :-)

Hi

I will be in Coral Bay from 21 to 26 April. Would love a fishing trip if anyone needs a deckie on these dates. Happy to pay my share of expenses, contribute beer, snacks etc. Have all my own gear and I am reasonably experienced having fished Coral bay a number of times before. Also have my own boat and fish frequently in Perth. 

Also taking a Kayak and am hoping to get some pointers as to where to try for squid from the Kayak. Used to squid land based in Coral Bay in the early 90s and did OK, but I cant remember where that was. Cheers for any help with this

Eric

My grandson managed his PB Dhuie on Good Friday, fishing in the MBFC Hinds Kitchen Classic with his Dad.

At 13.6 Kg it won him $500 and $100 tackle voucher for second heaviest juniors fish.

Well done Dude, I'm proud of ya !

 Heading to Exmouth in a weeks time . Anybody know what Tantabiidi ramp is like at the moment . I was there late November and the ramp was so full of sand it was un usable for our deep v inboard boat . I know it was going to be dredged for gamex but wondering if anyone is up there now or could tell me what its like at the moment .Cheers Paul

 Looking for a skipper

To take my self and my 16 year old g/son out dermersal fishing during the holidays, willing to pay all costs,  from 2 rocks to Rockingham, can't do Saturdays because of his sport, thanks

 
Enjoy 

 With Good Friday looking like a belter weather wise I have no doubt there'll be a flotilla on the water. 

What's everyone's plans? I'm hoping to hit the 50m mark where I haven't been for quite a while. 

Solunar calendar saying 51% fishing efficiency, in other words fish have half a chance lol. 

Will float Mulies out there too in that last hope of a Mack, saying that up to Gnaraloo early May so will gte my fix there fingers crossed. 

Just a coupla pics of some metro fish we stumbled across a few days before the ban came back into affect.

the day with the 2 dhus the sounder was on the blink so fishing blind and as you can see, persistence pays off!

 
Enjoy 

Hey gents,

Planning a trip to the mid west and want to do some balloon fishing.

I have a couple heavy spin reels with 50lb and 65lb line, but they "only" have 250-300m on them.
Also rod setup is the penn powercrank 10-15kg. Which admittedly handles much more weight than this.

But my concern is if the line length is enough?

How far do you let you balloon out? Rod and rel setup?

Any general advice welcomed.

Thanks!!

Hi brains trust,

Need my bearings done and repair to UFP hydraulic brakes.  Preferably mobile as front discs are locking up.  Boat is in Fremantle, can take the boat off the trailer to make it easier, need someone if possible in the next couple of weeks.  Have tried TowSafe but they are booked out for 4 weeks.  Any suggestions or recommendations?

Does anyone know the orientation of the rubber flap on the Scrubber valve on Quintrex Sports ? I've install new valves with the rubber flap facing downwards (6 o'clock ) I'm still getting lots of water in the hull and wondering if I have installed the rubber flap in the correct position face down ?

searched the Net with no joy 

Cheers

Ledge64

 So called professional long distance transport firm .......they maintain quite legal in NSW ......wouldn't want to try it in the West

 
Enjoy 

Does anyone have any idea what's the go with the moorings down in Geographe Bay... more specifically east/north of Abbey boat ramp. I was down that way over Xmas and noted lots of holidayers boats moored up. Down there couple of weeks ago and all free. I would usually end up in old dunsborough with the kids over Easter but if I'm further that way the place we stay doesn't have enough room for boat on trailer.

cheers 

 Morning All,

I've been watching Gido's fishing adventures for al while now and enjoy his content.

In the video he put out as per link below he speaks about purposed marine parks and sanctuary zones for the south coast.

He made a few very good points so i had a quick red and look at some of the maps and layouts this morning.

I think recreational beach fish has little to no impact on fish stocks so should be allowed along the whole coast.

Interesting some of the sanctuary zones are along th ebeach where inlets break out and inculde the inlet itself

www.youtube.com/watch

www.dbca.wa.gov.au/management/parks/plan-our-parks/proposed-south-coast-marine-park

Support the locals and get the messsage out.

 
Enjoy 

 
Enjoy 

 Hello All

Its been some time since posting, but keen for advise. I am re-pimping my rig, and plan to install, upgrade new electronics. Does anyone reconmmend any lazer cutters for a dash plate to be cut? and made, I will need some work to make it look good as upgrades will make gaps and wanting to make a base plate.

Look forward to response and diretion, have a few ideas, keen to know what others have done.

Also, keen to have a new deckie mate, normally launch from CPBA and live Sounth of River

Johno

Few more bits and bobs to go .