4wd spotties. Electrical advice needed
Submitted by Jim on Fri, 2022-09-02 04:56
Hi, any gurus out there that can help me with advice?
I have old school halogen spotties and I want to replace with led. Can I just cut the old wires on the halogens where they are mounted and simply rewire the new led wires in? So I don't have to muck around running new wires/fuses/switch. I assume leds wouldn't need a bigger fuse?
Cheers
____________________________________________________________________________
Bend over
.thumbnail.jpg "Late arvo buildup")
Spicey
Posts: 219
Date Joined: 17/01/11
Should be ok mate so long as
Should be ok mate so long as the current draw on the new ones is not greater than You current halogens.
Faulkner Family
Posts: 18025
Date Joined: 11/03/08
No probs at all. I did just
No probs at all. I did just that but with a light bar. Worked fine
RUSS and SANDY. A family that fishes together stays together
Rob H
Posts: 5796
Date Joined: 18/01/12
as long as they are actually
as long as they are actually halogens rather than HID's
Give a man a mask, and he'll show you his true face...
The older you get the more you realize that no one has a f++king clue what they're doing.
Everyone's just winging it.
Shark1
Posts: 1086
Date Joined: 21/05/12
remember LED is polarity
remember LED is polarity sensitive - plus must go on plus wire
Jim
Posts: 1334
Date Joined: 05/05/06
Cheers fellas.
Cheers fellas.
Bend over