FC droppers?

Now, I'm not trying to invade peoples secrets Wink

But, I decided to try flourocarbon droppers on our patanosta rigs on wednesday. We certainly had no problems getting bites, but I can't draw any conclusions from that as it just might have been productive - what I should have done was drop down a std mono patanosta rig and compared (if it didn't work as well - pass it to Sandra Tongue out).

 

What do you think guys? Certainly bream guys swear by FC. Is it beneficial with bottom bouncing rigs or not? 

____________________________________________________________________________

Soon to be de "dreamweaver" ed!


Posts: 439

Date Joined: 01/08/07

Abrasion resistance...

Sat, 2008-10-25 12:32

From what I've gleaned Colin the only benefit of Fluorocarbon as a leader is it's improved abrasion resistance compared to standard mono...

But when you look at what can be done with cheap Schneider line it's an easy decision not to bother with the expensive Fluorocarbon...

I've been giving the Schneider a go for the last few months and love it!

Dreamweaver's picture

Posts: 4688

Date Joined: 01/12/07

Cheers Damo

Sat, 2008-10-25 12:40

Yeah, I was given some, so thought I'd give it a go. It was 60lb Black Magic .

I've yet to try schneider, I know all you guys give it a very good wrap - I'm still yet to exhaust my stock of Jinkai and Black Magic.

One thing I did find with the FC - it made for nice stiff droppers that didn't tangle - though bit harder to knot properly.

 

 

Colin Molloy

(Colin 2 - Co-founding member of the prestigious Colin Club)

 

____________________________________________________________________________

Soon to be de "dreamweaver" ed!

Posts: 9358

Date Joined: 21/02/08

FC is about its invisibility

Sat, 2008-10-25 12:53

FC is about its invisibility in water as well as its refractive ndex is closer to water than mono.

Its lousy stuff to knot, so perhaps its a better choice for crimping?

____________________________________________________________________________

Posts: 9358

Date Joined: 21/02/08

You might want to have a

Sat, 2008-10-25 12:57

You might want to have a skim of this as well.

http://www.tackletour.com/reviewfluorocarbontest.html

____________________________________________________________________________

NOHA's picture

Posts: 914

Date Joined: 24/06/07

I would not use FC for

Sat, 2008-10-25 13:11

I would not use FC for tying dropper loops. If you are extending off those dropper or use 3 way swivels then FC had some advantages over mono for the extension piece that you tied your hook to.

In 60lb or less I found FC to be of greater benifit due to it abrasive resistance. I found that mono would get more quickly cut and damaged by fishes teeth right above the knot much quicker than FC. As a rule when rebaiting your line always run your finger down the line to the knot. If you feel nicks cut it off and retie. This is why I use 3 ways and at least 50cm of line to the hook. That lenght also allows inhaling fish, such as dhuies, to suck your bait in improving hookup ratios.

Not checking your line for nicks results in that big one that got away/dhuie bit me off scenerios.

Also FC goes opaque after each trip and is not reusable. I have stopped using it for paternosters and gone up to 80/120lb mono for my rigs now. Too many lost big fish lost over extended fights. I used 60lb before so I could break off when hung up to the bottom. Breaking away 120lb is not easy.

.
.
No Orange Hats Allowed

V8 twin turbo diesel....Ohh what a feeling!

____________________________________________________________________________

Twin turbo..V8 diesel..Ohh what a feeling!!

No Orange Hats Allowed

Dreamweaver's picture

Posts: 4688

Date Joined: 01/12/07

Cheers guys!

Sat, 2008-10-25 13:36

Yeah Till, your right mate - it's not the easiest to knot.

Noha - yes exactly! I used three ways - I'd hate to have to tie a dropper loop in FC and did find it very abrasion resistant and yes, 50cm is about the length of the droppers I use (good point on the Dhui!). As you say, and has been said before - whatever you use - you should always check your rigs - I check them after each drop and at the end of the session.

Appreciated guys!

 

Colin Molloy

(Colin 2 - Co-founding member of the prestigious Colin Club)

 

____________________________________________________________________________

Soon to be de "dreamweaver" ed!

Posts: 9358

Date Joined: 21/02/08

I think it probably really

Sun, 2008-10-26 08:56

I think it probably really depends on the brand as well. I have some stren that knots nicely, but I get the impression that a few of the stiffer brands are a real bitch.

____________________________________________________________________________

Dreamweaver's picture

Posts: 4688

Date Joined: 01/12/07

Cheers!

Sun, 2008-10-26 09:05

Yeah used unis myself and yes, four time through also. Like I said earlier, I always check the rigs each pull up. Had no problems with them slipping - even when I got buried by something big (assisted by a fairly quick drift).

As for knotting - not too difficult - just a bit harder than more subtle mono.


(Colin 2 - Co-founding member of the prestigious Colin Club)

 

PS EDIT of spelling mistake only Laughing

 

____________________________________________________________________________

Soon to be de "dreamweaver" ed!

ROCKPOM's picture

Posts: 625

Date Joined: 23/04/07

Use it all the time and not

Sun, 2008-10-26 19:32

Use it all the time and not a problem as of yet

As its a bit stiffer it tends to hold the bait out a bit straighter and gives less tangles..

Dreamweaver's picture

Posts: 4688

Date Joined: 01/12/07

Yeah Danny

Mon, 2008-10-27 06:39

I've found the same - stiffer and far less tangles. 

Colin Molloy

(Colin 2 - Co-founding member of the prestigious Colin Club)

 

____________________________________________________________________________

Soon to be de "dreamweaver" ed!

Dean's picture

Posts: 1943

Date Joined: 23/02/07

Stick with schneider or

Sun, 2008-10-26 20:22

Stick with schneider or similar, low cost and good abrasion resistance!

No difference in fish seeing the line etc.

Dreamweaver's picture

Posts: 4688

Date Joined: 01/12/07

Dean?

Mon, 2008-10-27 06:39

"No difference in fish seeing the line etc"

Can you eleablorate on that please?

Colin Molloy

(Colin 2 - Co-founding member of the prestigious Colin Club)

 

____________________________________________________________________________

Soon to be de "dreamweaver" ed!

Dean's picture

Posts: 1943

Date Joined: 23/02/07

I have used Flurocarbon and

Mon, 2008-10-27 06:57

I have used Flurocarbon and people fishing with schneider caught the same amount of fish (pinky Fishing out deep).

And I also used it in around the 40m area and don't think it makes a difference, still catching fish on both.

Dreamweaver's picture

Posts: 4688

Date Joined: 01/12/07

Cheers Dean

Mon, 2008-10-27 07:05

Thanks for that!

Colin Molloy

(Colin 2 - Co-founding member of the prestigious Colin Club)

 

____________________________________________________________________________

Soon to be de "dreamweaver" ed!

Posts: 478

Date Joined: 27/02/08

Hi Dean, Do you use the

Mon, 2008-10-27 08:28

Hi Dean,

Do you use the clear Schneider or the "coloured" one?

Steve

brenz's picture

Posts: 2182

Date Joined: 15/06/06

nothing better that coloured

Mon, 2008-10-27 12:04

nothing better that coloured schinder for deep water imo nice and tough
brenz


-------------------------------------------------------------------------------------



"BIT SQUIT LAH"

The Tackle shack, for all your fishing needs
huge range of stock to suit any fisherperson.
PH:9248 3800

thetackleshack@bigp

Dean's picture

Posts: 1943

Date Joined: 23/02/07

I use both

Mon, 2008-10-27 17:50

I use both