How Much ?

Dad is not currently using his boat and has decided to sell. But what is it worth?

The boat is a 1971 Quintrex Fishabout, has been stored in a shed, used for river fishing, the motor is 1988 Classic Mecury 2 stroke that has done about 300 hours.

Hull is good conditions but could do with a coat a paint. The trailer (brake back) is in good condition. Both boat and trailer are registered.

 

 

 

____________________________________________________________________________

 PB  Dhu  850 mm Pink 820mm 

Image Upload: 

sea-kem's picture

Posts: 14857

Date Joined: 30/11/09

 Solid boat and looks in

Sat, 2016-03-19 16:05

 Solid boat and looks in reasonable nick. Would have to be worth 2-2.5k minimum

____________________________________________________________________________

Love the West!

Posts: 6454

Date Joined: 08/08/11

 Good cheap crabbing boat for

Sat, 2016-03-19 16:43

 Good cheap crabbing boat for mandurah

____________________________________________________________________________

Fish! HARD!

chris raff's picture

Posts: 3257

Date Joined: 09/02/10

 Here’s your hull on Gumtree

Sat, 2016-03-19 17:40

 Here’s your hull on Gumtree to give you a idea , he’s asking $2700 apparently his erinrude’s not pumping water though . He has had 1270 visits and 2 offers in 9 days so there’s a bit of interest , but it’s still for sale .

So all be it your hull and trailer are sound plus the donk cranks up cold easy enough I reckon $2000 firm quick sale or start it at $3000 and work back from there for $2500ish if you don’t mind the umpteen tyre kickers .
Looks to have spent most of it’s life undercover would be a excellent little project to do up over a couple of weekends with a paint etc .
 
____________________________________________________________________________

Intelligence is like a four-wheel drive. It only allows you to get stuck in more remote places.”

Adam Gallash's picture

Posts: 15610

Date Joined: 29/11/05

+1

Sat, 2016-03-19 20:15

 +1 

 

____________________________________________________________________________

Site Admin - Just ask if you need assistance

hornet42's picture

Posts: 179

Date Joined: 24/07/12

Thanks

Mon, 2016-03-21 10:13

 Thanks for your input, will look at a coat of paint and tub up and go from there.

____________________________________________________________________________

 PB  Dhu  850 mm Pink 820mm 

Posts: 286

Date Joined: 21/07/14

 When i lived in Emouth 84-89

Mon, 2016-03-21 15:55

 When i lived in Emouth 84-89 I owned one of these that was made by RE Arnold in Maylands. It was an old boat even then with a 50HP Evinrude Lark that on WOT nearly walked on the water.

It had been welded a few times as the short chop up there is damaging to boats. The owner before me used to go out to Peak Is, the murions etc. I never did that but the gulf shoals,nw reef, lighthouse bay were no trouble. Tantabiddy inside was no trouble at all and outside on a good day was OK also.

I recommend this boat from my experience. Just check the worm drive for the steering under the dash as mine shit itself one day in shitty NW conditions and broken as it was perished. Also check where the ribs contact the skin as there should material there to seperate them.

Hope this helps.

Mike

 

hornet42's picture

Posts: 179

Date Joined: 24/07/12

Thanks

Wed, 2016-03-23 15:39

 Thanks for the heads up on the Worm drive will look at changing steering to cable

Thank Rob

____________________________________________________________________________

 PB  Dhu  850 mm Pink 820mm