Medium/high chirp 1kw pictures?
Submitted by azza823 on Fri, 2020-07-31 20:39
Anyone go picture of medium and high 1kw on the same unit in around 70 to 90m of water. I'm wanting to see how much of a difference there is.
Cheers Aaron
deep south
Posts: 190
Date Joined: 28/12/16
Are
Are you talking tvg medium or high ?
The next time i see that jig will be in the mouth of something big !!
Tim
Posts: 2497
Date Joined: 26/09/06
Chirp
I would guess Medium or High Chirp
azza823
Posts: 4
Date Joined: 24/03/19
I'm talking medium chirp to
I'm talking medium chirp to high chirp
ranmar850
Posts: 2702
Date Joined: 12/08/12
I have pictures from a B175M up here
No comparison to high, look at the more recent posts in the thread sounder photos. fishwrecked.com/forum/sounder-photos Certainly no trouble in defining fish and actual bottom type in those depths.
azza823
Posts: 4
Date Joined: 24/03/19
That's it not what I want to
That's it not what I want to see. Iv got medium and want to see the difference between high and medium. Will have to just do it myself I guess.
Stevo81
Posts: 1278
Date Joined: 16/04/12
Not many dual band (if
Not many dual band (if any??) Med/High trannys around so would probably need to be one of each. I have a two Garmin 7410s running a gt51m as well as a B265LH but can't find any screen shots showing both. 1kw high band is better at everything under 150m than the 600w gt51m.
Not sure many people would be running seperate 1kw med & high trannys...
•••••••• Electrical Contractor NOR ••••••••
azza823
Posts: 4
Date Joined: 24/03/19
Your right there is no
Your right there is no transducer that's medium/high. So would have to be a low/medium and a low/high. Iv got a low/medium. Just wanted to see some pictures of the high and hopefully someone has as so had a medium transducer to see how much difference between the two. High is a lot smaller cone so should get a lot better picture because lest information to work with.