spedo on nissan patrol
Submitted by mikeurnot on Thu, 2022-06-02 11:35
Hope someone may be able to help . I have a nissan patrol gq 1992 4.2 lt petrol . My spedo when I satrt the car is at the right oint but when i move the car
it goes right around to maxinum . After a while driving it will star working again . On a few days there are no problems but is rare . Has anyone had this
problem and some advice to fix it .
Cheers
carnarvonite
Posts: 8667
Date Joined: 24/07/07
Speedo
Is it the speedo or the gauges that are playing up
My suggestion is go to the wreckers and get another one and swap it out
mikeurnot
Posts: 93
Date Joined: 05/05/11
Its is just the speedo
Its is just the speedo playing up
mikeurnot
Posts: 93
Date Joined: 05/05/11
Its is just the speedo
Its is just the speedo playing up
Jim
Posts: 1335
Date Joined: 05/05/06
I had a 1990 4runner
I had a 1990 4runner (R.I.P) that had a similar issue and it was something to do with the cable at the back of the gauge or the cable itself, you had to take the whole dash apart to fix it. I just drove off the tacho for 10 years and from then on, I never got another speeding fine (in that car)
Bend over
Marineboy
Posts: 842
Date Joined: 14/03/14
Speedo
At a guess there is probably a transducer or something electronic hanging out of the transmission that is rooted I'm doubting it is cable driven ?
My spots are so secret even the fish don't know about them !
carnarvonite
Posts: 8667
Date Joined: 24/07/07
Gq
Electric speedo on GQs,
Might pay to pull the plug off the back of the gearbox , check the wiring and clean it up then put it back on,
Jim
Posts: 1335
Date Joined: 05/05/06
The only thing electronic on
Your probably right, im far from an expert but at the time I thought the only thing electronic on my 4runner was the digital clock! They are such a beast those toyotas and no doubt played a big part building toyotas reputation
Bend over
scubafish
Posts: 962
Date Joined: 15/08/12
Cable or electronic ?
Elec try resetting the faults on the computer.
Cable could be that you have some teeth missing in the drive cable .
Have a holden calis
The mech tried to hit for $350+ for a faulty fuel gauge, said he had to pull the whole dash out etc,etc.
Reset the faults on the onboard comp 2min job ,all good now .
http://img.gg/BQ91Sys
mikeurnot
Posts: 93
Date Joined: 05/05/11
Thanks all have found the
Thanks all have found the part I need . It attaches to the rear of the speed sensor at gear box . Now to hunt it down .
mikeurnot
Posts: 93
Date Joined: 05/05/11
Thanks all have found the
Thanks all have found the part I need . It attaches to the rear of the speed sensor at gear box . Now to hunt it down .