Stainless Fabrication
Submitted by Pete D on Tue, 2007-07-17 10:46
Can be any area in metro Perth.
Cheers Pete
G'day
Can anyone recommend a good stainless steel marine fabricator. I need a duckboard frame welded up which looks like this;
Can anyone recommend a good stainless steel marine fabricator. I need a duckboard frame welded up which looks like this;
Can be any area in metro Perth.
Cheers Pete
Andy Mac
Posts: 4778
Date Joined: 03/02/06
Nice 3D Pete
Or are you just going to get some NOR slaves like Tony H with a couple of oars and whip them while you stand on your duckboard.
Cheers
Cheers
Andy Mac (Fishwrecked Reeltime Editor & Forum Moderator)
Youngest member of the Fishwrecked Old Farts Club
Pete D
Posts: 1681
Date Joined: 07/06/07
Ha ha
There would be no room for me with NOR big bottoms on the duck board
Sorry about the lack of detail Andy...but I do have to do some real work.
Cheers Pete
Ryan Thipthorp (not verified)
Posts: 16
Date Joined: 01/01/70
pppffffffff
Do some real work,pfffff......you mean inbetween doing our Exmouth fishing schedule, organising fishing stuff for Exmouth, correspondence emails, golf, planning fishing and diving for the coming week.......yeh right
** Oceanside = Strudwick,Daiwa,Van Staal,Jigmaster Rods, Shimano,Penn etc...** Owner/Operator Oceanside Tackle and Marine 364 South Street, O'Connor, Perth WA Ph# 9337 5682 Fishing/Boating/Dive/Marine ** OPEN 7 DAYS **
Under the Hammer
Posts: 60
Date Joined: 19/05/07
S/Steel Fabrication
Try Vic @ Gamemaster Marine in Fremantle...
.....or....
Alternatively speak with Peter Milner (Boat builder in Henderson)
Good luck!
T.
Ryan Thipthorp (not verified)
Posts: 16
Date Joined: 01/01/70
Good!
Vic from Gamemaster is very good but not cheap, he's moved from Freo, he's just around the corner from me in O'Connor!
** Oceanside = Strudwick,Daiwa,Van Staal,Jigmaster Rods, Shimano,Penn etc...** Owner/Operator Oceanside Tackle and Marine 364 South Street, O'Connor, Perth WA Ph# 9337 5682 Fishing/Boating/Dive/Marine ** OPEN 7 DAYS **
Mick B
Posts: 109
Date Joined: 20/08/06
Make it yourself
In Oz you've got lots of guys who make 'roo bars for the outback trucks - yes?
These guys have bending machines and stainless bends just like steel - get the tube yourself and get one of these guys to bend it for you - simple.
Making up the joints isn't rocket science and the flanges are brought ready made.
Make sure the Stainless is 316L spec. (this is specifically for marine use) and ensure you get the same spec. welding rods so you achieve a compatible join.
If you can access a pip bender PM me and I'll send you the 'how to'.
Go for it - you'll save a fortune believe me.
Pete D
Posts: 1681
Date Joined: 07/06/07
Booked
All booked in with Ozwest...just hope it is finished in time for Exy.
Thanks for the replys.
Cheers Pete
ps Would love to make it myself Mick B as I do have access to all the go gear (only 38 OD bender though) , but time is the issue here...and my tax return has covered the cost of this little project.