Trailer Brakes

I have a US trailer that has come in with Poly Tubing for the hydraulic brakes.

Does anyone know what the situation is in WA regarding the legality ( or otherwise) of using poly tubing instead of copper ?

 

____________________________________________________________________________

Don't spend all your money on beer, boats, and fishing. Save some to spend foolishly


Vinesh87's picture

Posts: 2751

Date Joined: 02/04/11

If you cant find it on the

Thu, 2012-08-16 09:27

If you cant find it on the vsb or in adr i think it will just need to be ADR approved.

Tim's picture

Posts: 2497

Date Joined: 26/09/06

Inspection

Thu, 2012-08-16 09:27

Had a mate go thru this on a trailer he imported with his boat.
When he had the rego inspection done they rejected it as the poly tube wasn't marked with an AS code.

He was told poly is ok as long as it is marked with an Australian Standards code

Ericl's picture

Posts: 463

Date Joined: 02/05/11

No AS Mark

Thu, 2012-08-16 09:51

I dont think there were any markings on the tubing, so probably have to replace with copper. Not too big a job if the boat wasn't on the trailer

____________________________________________________________________________

Don't spend all your money on beer, boats, and fishing. Save some to spend foolishly

Posts: 563

Date Joined: 27/08/09

Just check, but i think

Thu, 2012-08-16 10:13

Just check, but i think copper is no longer legal.... Has to be steel.

grayzeee's picture

Posts: 2283

Date Joined: 09/07/09

I replaced mine with one of

Thu, 2012-08-16 10:03

I replaced mine with one of these kits.   Cheap and easy

http://www.hydrastar.com.au/brake-lines/hydraline/tandem-axle-trailer-kits/

____________________________________________________________________________

If I spent half as long fishing , as I do reading this bloody forum , I'd be twice the fisherman I am. 

Posts: 408

Date Joined: 12/03/10

robs trailers

Thu, 2012-08-16 10:11

Talk to Rob at Robs trailer repairs in wangara he does a lot of us trailers for rego he has just done the electric brakes on my us trailer for rego

Ericl's picture

Posts: 463

Date Joined: 02/05/11

Hydraline looks good

Thu, 2012-08-16 10:28

Just spoken to the guys at Hydraline and that seems the way to go. All ready with no cutting, flaring etc and the fittings will suit my Hydrastar actuator and Kodiak brakes

Thanks all for the info

Cheers

Ericl

PS, Johno67, how much approx did Robs Trailer charge ?

____________________________________________________________________________

Don't spend all your money on beer, boats, and fishing. Save some to spend foolishly