Wet box install recommendations
Submitted by CD on Sun, 2019-08-04 11:41
Hi guys
I’m having issues getting readings from my sounder over around 15 knots. It’s caused by the mount for the transducer which is pretty crap. Rather than replace the mount I figured I’d just go for a wet box install. The boat is a Haines 580 breeze and is running a TM260. Can anyone please recommend someone who could do the wet box installation for me?? I’ve searched on here and can find people who have done it themselves, but couldn’t find recommendations for places that do the installs.
Any help would be great.
Thanks
Alan James
Posts: 2206
Date Joined: 30/06/09
Fibrelite boats
would be a good place to start.
https://fibreliteboats.com.au/
PBS
Posts: 36
Date Joined: 06/10/13
Transducer installations
Ben Punch at fibrelite boats was recomended to me and I was very happy with his advice and work
https://fibreliteboats.com.au/
wangler
Posts: 607
Date Joined: 26/04/08
wet box installation
Send me some pics of the back inside your hull down by the bilge
Want to make someone mad... tell a lie! Want to get the world upset... tell the TRUTH !
Dougie
CD
Posts: 45
Date Joined: 06/12/16
Thanks guys for your help
Thanks guys for your help
CD
Posts: 45
Date Joined: 06/12/16
Thanks guys for your help
Thanks guys for your help
Stevo81
Posts: 1278
Date Joined: 16/04/12
Another vote for Fibrelite
Another vote for Fibrelite
•••••••• Electrical Contractor NOR ••••••••
Alpha
Posts: 193
Date Joined: 13/02/17
nice job
Tell me more Stev. What gear are you running there and sounder? and how have they sealed the transducers through the hull?
I want to up grade my the sounder to a Furuno 295 but the obvious is the 2 transducers and were to fit them. Your set up maybe the answer as i dont want to run two big goorila transom mounts at the back.
Its on a 6.5 Haines Hunter, the space between the transom and the fuel tank in the bildge maybe a squeeze for me but.