What glue?
Submitted by scotto on Mon, 2012-01-23 13:45
I'm redoing the dinghy carpet as the old stuff is perishing.
What adhesive would you recommend to stick marine carpet, to marine ply, and where can you get it?
Cheers
Scotto
big john
Posts: 8749
Date Joined: 20/07/06
Contact
Plain contact cement from bunnings worked a treat on mine.
Trick is to apply it to both surfaces, let it get tack dry and then press firmly together.
WA based manufacturer and supplier of premium leadhead jigs, fligs, bucktail jigs, 'bulletproof' soft plastic jig heads and XOS bullet jig heads.
Jigs available online in my web store!
big john
Posts: 8749
Date Joined: 20/07/06
+
Seal the ply with clear estapol first.
WA based manufacturer and supplier of premium leadhead jigs, fligs, bucktail jigs, 'bulletproof' soft plastic jig heads and XOS bullet jig heads.
Jigs available online in my web store!
strike_zone
Posts: 403
Date Joined: 09/09/10
supa grip
is the name of the glue that the dealers use which is a contact advesive and apply as big john said
Troy Summers
Posts: 408
Date Joined: 14/08/11
Scotto, Contact is fine and
Scotto, Contact is fine and as big john says make sure you put it on both surfaces, but rather than sealing the ply first, just put a layer of contact on the ply(buy fast grip from bunnings as its cheaper and just as good... Im a carpet layer and its what I use!!) then when that dries(a few minutes) put another layer onto the ply and then onto the backing of the carpet.... by the time you get the carpet covered itll be pretty much ready to stick together.
Marine carpet is an absolute bitch to lay normally as the correct adhesive doesnt even like to hold it.... aaagh we had a whole classroom of the crap the other day and it sucked balls... wasnt even enough left over for me to do a mates boat( which I was planning on doing)
Troy
PS watch the fumes on that stuff.. and dont smoke around the open tin... its one of the most flammable substances around(I learnt that the hard way)
greatrex
Posts: 210
Date Joined: 29/08/11
contact adhesive from
contact adhesive from bunnings did the job on my boat
fisho-ron
Posts: 2539
Date Joined: 26/09/09
i used sikaflex on mine mate,
i used sikaflex on mine mate, works a treat.
big bead on the ply, metal scraper to sread it out and stuck for life.
chriss
Posts: 39
Date Joined: 05/01/12
sikaflex is a bit more
sikaflex is a bit more expensive than contact though, and you need to make sure you get the right one for the job.
I fish for fun, but would kill for a feed of flatties...