wheel bearings
Submitted by tournament on Sun, 2012-02-19 20:39
just had the boat serviced while it was there the 4 wheel bearings were replaced was wondering wat others have paid for the same job with good quality bearings
doublej
Posts: 169
Date Joined: 08/07/09
$80 - $120 for parts
Depends on single or tandem axle.
I'd say around $20 - $30 per wheel.
Plus labour $$$$$$$$.
carnarvonite
Posts: 8667
Date Joined: 24/07/07
Special offer
There was a special offer from one of our sponsors for wheel bearing sets for about $10 or less without checking.
Usually takes about 20-30 minutes a wheel to remove bearings and cones , refit bearings, greaese up and put back on the trailer so would expect something like $40-$50 a wheel plus bearings.
jezman
Posts: 37
Date Joined: 08/02/11
Replacing bearings is a
Replacing bearings is a pretty simple job, maybe u should consider tackling this yourself next time, just make sure you pack them with high quality grease prior to installing them in your hub, will save you a couple hundred bucks which would be better off spent on a new rod? ;)