WTB
Submitted by lachieH on Sun, 2014-08-10 14:59
This post is really about a few things. First of all I have a really old ryobi cobra S but was hardly used until I did at the start of the year but lost the winding handle down the rocks at the dawesville cut. It's a good little reel and came as a combo and really want a new handle.
secondly I have a rod with a tip which has a big chip and it frayed all the fishing line that goes through it. Any idea where I could buy a tip that would fit and how to put the tip on?
any info would be appreciated!
____________________________________________________________________________
Fishing the swan for bream, it's just an obsession
barneyboy
Posts: 1392
Date Joined: 08/01/09
I am sure
your local tackle shop should be able to help you out with both of those
FEEEISH ONNN!!!
DUNGA
Posts: 86
Date Joined: 03/06/14
Tackle Shop
They should be able to put the tip on for you to
There's a fine line between fishing and just standing on the shore like an idiot.
mjohns
Posts: 337
Date Joined: 11/01/07
otherwise use a lighter to
otherwise use a lighter to warm the tip (just the base of the tip on the metal) just a bit and itll come off easily
take it with you to buy a new tip , then glue the new one on ... straight..
trymyluck
Posts: 908
Date Joined: 06/05/12
As above , then take the old
As above , then take the old one to one the sponsors shops and get one the same size, put on with some hot melt glue, so it will come off again ..... Or dimly get the shop to do it, only takes 2 minutes
Oceanside Tackle
Posts: 2803
Date Joined: 23/07/09
help
Yep as the guys have said, just bring in the rod and we'll glue on a new tip for $8.00 (FW pricing) plus fit it with hi-temp glue free of charge, that easy.
As for the handle, bring in the reel and we'll go from there.
Oceanside Team - Specializing in Jigging for demersal, Super Deep Fishing and Cockburn Sound Pink Snapper.
Don't forget to ~ Like us on Facebook ~
Phone #(08) 9337 5682 - Shop 4/364 South Street O'Connor - OPEN 7 Days