yamaha 40h fwd controls HELP
Submitted by southcity104 on Mon, 2010-02-08 07:40
After a recent refit im hoping to get her on the water this week but cant figure out how all this wiring was arranged in the fwd control. If anyone has experience with these, any advice would be appreciated.
____________________________________________________________________________
"Its a life style job"
kempy
Posts: 810
Date Joined: 28/05/09
oh god
oh god
Dinkum Auto Electrical A/C & Mechanical Unit 10/16 Kent way Malaga 0438755754 Also Mobile
Open 7 days except when we are fishn For all your auto electrical needs
Faulkner Family
Posts: 18055
Date Joined: 11/03/08
my guess , take it to
my guess , take it to someone that knows what they are doing. looks to be a bit of a mess
RUSS and SANDY. A family that fishes together stays together
JohnSorrell
Posts: 137
Date Joined: 28/07/09
Engine / Controls Wiring Colour Diagram
Gone Fishing...
southcity104
Posts: 1659
Date Joined: 27/01/09
cheers john
It does run and tilt but how the wires were arranged to sit inside the unit is baffling me atm. From memory not all were in side.
If anyone has a 98 yamaha 40 i could look at south of the river it would be appreciated.
"Its a life style job"
Andy
Posts: 522
Date Joined: 08/10/05
wires
all those wires do fit inside the control box, except the gauge wiring harness which is the red, black, yellow and green. pain in the arse to get them all back in, they are a very tight fit. all wires look like they are connected up. they are colour coded anyway. just takes some time to arrange them so the cover will go back on. were you just removing the control cables? if so the whole back cover did not have to come off.
Just dont crimp any wires when screwing the back cover back on.
southcity104
Posts: 1659
Date Joined: 27/01/09
Thanks Andy. Ill git it a try
...
"Its a life style job"
southcity104
Posts: 1659
Date Joined: 27/01/09
All sorted
You beauty!!!!
"Its a life style job"