Birthday time for the Quinnie
Following on from my Gnaraloo post and the other post on here about a leaking Quinnie I thought I'd put this up as it's also something to look out for on the Quintrex boats. So the girl has had a hard working life and the cracks on the forward gunnel as you can see had gotten progressively worse I thought it time to strip her down and giver her a good refurb. There are also a couple of oher cracks here and there but nothing structural as I can see.
The gunnel section will be getting a repaint and just in time too as the paint bubbling had become bad around the rod holders etc. New windscreens, all new floorboards as the old one's are rotten and the new one's will be sealed properly with evadure. New carpets and new seating couretsy of Zoom. I went to the candy store errr Whitworths and came out quite a few hunge lighter with a new VHF, water separator assembly and other goodies. A very small tube of duralac for the screws and I will be greasing under the rod holders before they go down to help seal to the gunnels properly.
Drained the fuel tank today and it looks good inside from what I can see, some small particles but no water and any major crap. Will post more pics when she's done.
So thanks to photobucket all the original images are gone
But here are the latest
All the weld repairs are done, managed to find a few small cracks in the rib stiffeners but nothing major. She's all sanded down now and waiting for some dryer weather to get some primer and paint on. It's amazing the shit you find under decks when you rip everything out. No more muesli bars allowed on board, fricken wrappers everywhere under there. Hope to have some painted pics soon.
Love the West!
Josh-759
Posts: 52
Date Joined: 23/10/16
Going to be following this
Going to be following this closely.
Have you got a new dash setup going in or just replace with the stock plastic one???
Josh
sea-kem
Posts: 15007
Date Joined: 30/11/09
I've repaired some small
I've repaired some small cracks in the existing with a very good product called bond and seal from Wurth and have painted them with a hard plastic spray pack. They've come up a treat.
Love the West!
Deleted
Posts: 6265
Date Joined: 26/04/14
inbuilt esky
inbuilt esky
sea-kem
Posts: 15007
Date Joined: 30/11/09
I've got two kill tanks
I've got two kill tanks Gilly and think I'll be lining them as they are just ali skin at the moment and ice melts really quick in them.
Love the West!
Deleted
Posts: 6265
Date Joined: 26/04/14
Outwide
Posts: 68
Date Joined: 12/05/17
My old quinny cracked
My old quinny cracked exatcly the same as yours time after time. in the end i left it and it never grew. I made my own box seats and one side had an inbuilt esky for drinks and the other had tackle storage. Made the deck alot clearer to.
sea-kem
Posts: 15007
Date Joined: 30/11/09
Yeah that's the plan with
Yeah that's the plan with the seats hopefully.
Love the West!
anypuddle
Posts: 597
Date Joined: 22/01/12
how old is she? I stripped
how old is she? I stripped my old glass boat bare about 6 years ago with a mate. Saved my boats life
Anywhere anytime
sea-kem
Posts: 15007
Date Joined: 30/11/09
She's a 2006 model mate, so
She's a 2006 model mate, so well due.
Love the West!
Ashen
Posts: 1042
Date Joined: 22/03/13
Fruits of your labour
No doubt when its all done, you will have a boat that will last years!
Keep up the good work mate
A fish in the hand is worth 10 in the water!
sea-kem
Posts: 15007
Date Joined: 30/11/09
Few new pics added.
Few new pics added.
Love the West!
Silver Fox
Posts: 1113
Date Joined: 19/06/14
Nice work Andy
Keep chopping and turn her into a centre console....:)
My wife understands why I clean my rods n reels in the shower....
sea-kem
Posts: 15007
Date Joined: 30/11/09
Ha ha cheers Chris, I'm
Ha ha cheers Chris, I'm already building a smaller version centre at my workshop.
Love the West!
Ashen
Posts: 1042
Date Joined: 22/03/13
Haha
Yeah, and it's my new crabbing boat!
A fish in the hand is worth 10 in the water!
Willlo
Posts: 1490
Date Joined: 07/10/11
Looks good Andy i will post
Looks good Andy i will post a pic of my little cc conversion when it's done.
Call Sign - BZ785
Haynes Hunter Prowler CC