Prop help
Submitted by Percula on Sat, 2016-05-14 18:44
Hi guys
I have a 150 yammy 4 stroke.
Current prop is 3 blade, and the only numbers on it are 17m.
Does this mean it's a 17 pitch? How do I know the diameter or is that dependant on the engine (meaning I can just look it up)
Zac C
Posts: 47
Date Joined: 23/01/10
If it's an original prop it
If it's an original prop it should be on the inside hub of the prop, it should give you the prop diameter and pitch. You will need to take the prop off to see it.
Travisd
Posts: 315
Date Joined: 07/05/11
U know
i thought they were 15 inch 17 pitch.. Have the same motor now but had an f115 too
17 inch / 21 degree also sounds familiar but now I'm confused. Knock split pin out and loosen- just use a soft bit of timber between prop and Skeg when ur doing the bolt - 5 min job tops
Baron Sportsman
Just the depth that Varies
sarcasm0
Posts: 1396
Date Joined: 25/06/09
Yes
17m is 17 inch prop.