General Discussion
Here's a dumb question . . .
Submitted by Cruise Control on Fri, 2015-10-09 13:47If you launch at Cockburn and fish at Rotto (say) when the ban is in for Cockburn but the demersal ban hasn't started and you catch a couple of pinkies can you bring them back through the sound to retrieve at Cockburn ? if you can, how do fisheries know that the fish was not caught in Cockburn ?
- 7 comments
- 2849 reads
swan river prawns
Submitted by petermac on Thu, 2015-10-08 19:45a few year back the swan was restocked with prawn frie would it be worth a old time drag net session, come those hot summer evenings , and if you get a few cobbler as a by catch do they still have to be released
- 6 comments
- 3666 reads
bent st ramp rockingham
Submitted by petermac on Thu, 2015-10-08 19:22half of the ramp will be closed for six weeks while the ramp is repaired 3 weeks 1 side another the 3 the other side the light at the end of the ramp has only been out for 2 years wonder if they will fix that too
- 2 comments
- 2315 reads
New Vehicle Test Drive
Submitted by slugger on Tue, 2015-10-06 14:40anyone insisted on hooking up the boat when test driving a new fourby ?
im finding dealers not willing ( perhaps insurance ) , then again perhaps business is booming....and they are too lazy
- 12 comments
- 3080 reads
Abrolhos mischief
Submitted by Rob H on Mon, 2015-10-05 23:43 At the islands for the weekend with 4 of the kids
These 2 girls look like butter wouldnt melt...
Young Mac nodded off early and...
We all had a good laugh, until I spotted my reflection
Not happy Jan 
Incidentally, the sharks are shocking even in the shallows this time.
Came back today, but the forecast 16-18 knots became 30 plus as we were about to leave at 9.
Spoke to a mate who has a crayboat and was heading back but it was the kids who couldnt be bothered waiting, "lets just go Dad, we've had worse before"
and most of the squalls had passed
So hammer down, a bit of surfing in the big swell and home 10 minutes later than we would have taken.
- 8 comments
- 3226 reads
Daiwa bearing sizes
Submitted by Rob H on Mon, 2015-10-05 22:52Can anyone point me in the direction of the bearing sizes for a Daiwa Saltist 40HA?
- 4 comments
- 2324 reads
NRL grand final
Submitted by Rob H on Sun, 2015-10-04 21:25Wow out at the islands and listened to the end of the NRL GF, that had all and more of the drama that a grand final needs!!
even if you dont follow it, check it out.
Equalised at full time, missed the kick to win then won in overtime by a team that has never had a flag and legend created
- 5 comments
- 2379 reads
Cheeky Virgin
Submitted by Dale on Fri, 2015-10-02 14:42This will put a bad taste in people's mouth who paid extraordinary amounts to get to Melbourne for the grandy with Virgin putting on flights today and tomorrow from $385 each way. Don't have to be dead to be stiff.
- 2 comments
- 2486 reads
AFL Grand Final
Submitted by Justin M on Wed, 2015-09-30 20:03Its down to the two best teams of the year, the mighty fighting Hawks and the high flying Eagles...the battle of the birds. Hawks are going for a shot at immortality, the Eagles for their first flag in nearly a decade.
Just a bit of light hearted nonsense to get the ball rolling...
The North Melbourne Curse. You've heard of the Kennett curse but there is a little known curse going back a number of years involving North Melbourne and Prelims (in the current form). The side who has beaten the Kangas in the Prelims has gone on to get smashed in the GF. Also all the Eagles premierships have come in even years....That does it for me 
- 239 comments
- 14814 reads
collapsible cray pot
Submitted by NORUN NOFUN on Wed, 2015-09-30 07:08Any opinions on the all steel collapsible cray pot ?
Looks like a good option where you need the space on the deck ?
- 4 comments
- 4099 reads
any ford car salesmen on here
Submitted by roddo on Tue, 2015-09-29 17:58Hi all
Are there any ford car salesmen on here the father inlaw wants a ranger xls auto with about 10k of add ons he wants to buy this week. he will be trading in a patrol also and ford have offered him 13k for it. Just wanted to see if we can give the business to someone on here. He is located in golden bay but will travel if he can get a better deal.
Cheers
Rod
- 6 comments
- 2756 reads
Is this misleading? http://fishwrecked.com/forum/atomix-60ht
Submitted by Lastlightmike on Tue, 2015-09-29 16:34I believe Rainier Best is the The General Manager for HITECH MARINE, but Pauline who obviously works there seems to have no idea. I'm under the impression that she thinks he's a customer. Does anyone find this exchange troubling? Read this short thread.
atomix 6.0ht
Anyone know anhthing about atomix boats?
Anyone own one?
Saw an ad for one looks nice but seems too cheap at 45k new 200 opti on back.
Being sold by pvt seller "unused".... very suss

Posts: 164
Date Joined: 27/06/12
Kiwi design and made in China, thats all I know.

Posts: 2182
Date Joined: 02/04/11
Hmmm they have always been super cheap but !
I remember i was thinking the same thing 3 yrs ago when i was looking !
Posts: 58
Date Joined: 19/08/13
saw one at Mandurah boat show couple of years ago. Terrible transom design for fishing and no deck room, you wouldn't expect any support from manufacturer if you had any problem's with it

Posts: 147
Date Joined: 25/11/13
Dont think I wanna be the first....
Posts: 6
Date Joined: 12/03/14
Dont touch them.. 2 mates imported two from China via some website.. only good thing about them is the 150 yam 4 strokes.. terrible layout, has a big "veranda" off the cabin which encroaches into the deck space... if your 6 foot tall you will be banging your head on it. all deck fittings and screws are rusty, wiring all replaced after 2 years.. from memory paid about 32 K each landed.. the bloke selling has most likely done the same and trying to make an easy dollar.
cheers
marty

Posts: 1926
Date Joined: 18/01/07
Fittings are generally non-stainless hence the rusty screws etc. on some of the cheaper models coming out of China. By the time you replaced them all with stainless you may have well bought a more decent boat in the first place.
probably cheap wiring too!!
My channel - FishOnLine Productions
https://www.youtube.com/channel/UCbUVNa-ViyGm_FTDSv4Nqzg/videos

Posts: 1
Date Joined: 08/04/14
Gee, I rarely comment on these sites 'cause they can get a little emotional but you've got me going with this one. I purchased an Atomix 600 Centre Console from Hi Tech Marine in Perth late last year (they are the national distributers now)... absolutely fantastic boat. 10 years hull warranty, 2 years on the trailer and 5 on the Merc 150 4 stroke. Fittings are 316 stainless and I haven't had a drama. The hull is made using a technique called resin infusion which allows the hull to have great strength and weighs in lighter than all the competitors I researched. This also allows Atomix to use absolutely no wood in their boat at all. I mainly purchased the boat because my mechanics father purchased a hard top at last years Mandurah Boat Show from Hi Tech and he raves about the thing... for your info MartyG the clearance from floor to under the HT is 191cm (bit bigger than 6 foot mate) directly through the skippers position. No issues with wiring etc, Hi Tech completely rig the boat in Perth with all wiring, harnesses, controls, cables and accessories. I paid $54k with duel batteries, Vessel View, NSS7 Simrad, Simrad VHF and Alpine stereo.. Absolutely rapped with the product and would recommend this boat to anyone who is serious about mid size boating. Oh, just a PS.... the Atomix 600 and 560 series meet and/or exceed the Australian Standard AS1799-1, ISO12217-1 and 94/25CE.... wonder how many others meet these standards?

Posts: 2
Date Joined: 17/03/11
Hi Rainier,
Thanks for the positive feedback.
It’s good to know your enjoying your Atomix boat, that’s the kind of news we want to hear!
We have some exciting news for you. I know you were after more storage on your 600 Atomix.
I have just heard back from NZ they have made a 2 tier Side pocket attachment For each side, and an optional clip in Seat Box with a hatch that lifts up for additional storage/fridges ect.
These can actually clip into your existing model boat and gives you loads of storage and 2 extra comfy seats.
We also have some other exciting clip-in accessories coming.
These can turn your Atomix into either a Fishing Boat with plenty of room to stand one day and a Cruising boat seating 6 people on the deck.
Please also remember you have the Hitech/Mercury Service discount on your first service due soon.
Call me to arrange booking 9309 2888.
Take Care
Pauline
Hitech Marine
Hitech Marine
WA - 12 Uppill Place Wangara - 08 9309 2888
NSW - 40 Princes Hwy Yallah - 02 4256 6135
www.atomixboats.com.au
- 3 comments
- 3384 reads
Deckie available wed or thursday
Submitted by Just1morecast on Sun, 2015-09-27 14:55Hey all, fly home from work tomorrow arvo and have 4days off.Happy to chip in fuel bait etc. Havent had a jig for about 9months and startimg to get an itch. Located in belmont but happy to travel anywhere from freo to yanchep. Have some experience with demersal and sambo jigging and happy to fish for what the captain wants. A days notice would be great ill have to go buy a rod for the day. Pm me for contact details
Cheers
Sha
State of business
Submitted by sea-kem on Fri, 2015-09-25 09:34Just wondering how everyone is travelling business and work wise at the moment after the start of the year when it all went to shit. We have actually picked up immmensely and are flat out, I'm actually considering taking on an apprentice, maybe someone a little older. Have picked up two new clients and one has the contract for all the Coles maintenence around town. The oil and gas side of things is still just a trickle but the completeions side of things are busy so that's keeping us busy on that side of things. So how are the rest of you fairing?
- 57 comments
- 4728 reads
Cooler Bag - Product Review
Submitted by JohnF on Fri, 2015-09-25 09:30After getting in a bit late on Wednesday night and not looking forward to cleaning the fish, we left them in the shed in the MadFish cooler bag with 2 bags of ice.
24 hours later, most of the ice still there, fish perfect for filleting.
Great product.
- 13 comments
- 5385 reads
Is this a scam?
Submitted by burnz on Thu, 2015-09-24 17:05Just had this popup on my tablet, I dont trust it, but it could be legit. Does anyone know for sure? I had a little giggle when it popped up.
- 7 comments
- 3868 reads
Beach fishing NOR
Submitted by Iceman on Thu, 2015-09-24 11:03Planning for a beach fish anywhere north of Burns beach. have not been for a while so any reports of what's being caught would be appreciated. Looking to target tailor and Mullas in the evening. have 4WD so all options available.
- 1 comment
- 2216 reads
Boat names
Submitted by carnarvonite on Tue, 2015-09-22 13:06Got them in an email not long back, these ones are the best of them
- 10 comments
- 4183 reads
adam goodes retires
Submitted by petermac on Mon, 2015-09-21 21:33Adam Goodes I really wish he hadn't started diving in the last 2 years of his stellar career , personaly I think he was right in pointing out he was racially vilified by a girl . However it wasn't that led to the booing it was his diving for free kicks that caused it .
Adam would not have coped if he played 25 years ago , I heard jimmy and phil krackour copping far worse than adam ever got and yet they coped not saying it was right but they managed , Maurice Rioli was never booed by opposition supporters the actually politely clapped his efforts , why because he never took a dive
- 10 comments
- 3113 reads
Monkey Mia
Submitted by jng on Mon, 2015-09-21 19:55Hey guys,
Will be heading up the denham over the 2nd week of school holidays and its my first time up there so just after some general info on whats are the things to watch out for regarding weather. I will be taking a 7.5m boat up. Have done some research and most says its not the best time of the year weather wise, (not leaving the boat behind)
Just after some general info regarding things to look out for when the winds are up etc
Planning to do most of the fishing out of monkey mia ive done some research and some guys are saying its more sheltered on the monkey mia side? can some one confirm this? as i will be taking up my little 3year boy and the missus.
Which side do guys prefer to fish monkey mia or denham ie wind directions etc. obviously if its to windy the boat stays on the land.
Any info would be greatly appreciated!
TIA Justin
- 5 comments
- 2958 reads
Aluminium Fabricator required.
Submitted by Wes F on Mon, 2015-09-21 11:47Can some one please help me out. I wanting to make a storage compartment for the back of my 4WD. Fairly simple design. Top will be 1080mm (D)x 1380mm (W) O/A made in 2 havles for easy removal, locked down with recessed latches. Base will be 950mm (D) x 1010mm (W) with a centre partion. Frame 20 x 20 tube, top sheeted with 5mm and base sheeted with 3mm. I have full drawings and dimensions of components. I'm more than capable of fabricating this with a bit of assistance obtaining the material and with welding as i do not have access to a aluminium welder. All expenses will be paid for. I'll be back in Perth 6th October would be great if could sort something out between now and than. Cheers Wes.
- 8 comments
- 2526 reads
AFL preliminary finals
Submitted by randall df223 on Sun, 2015-09-20 17:24Ok. First up. Which freo supporter, or at least non hawthorn supporter (willing to support freo on the night) wants to come to the game on friday night with me.
I will be be buying two tickets tomorrow morning but my wife has injured her knee and wont be going.
Cost will be whatever the ticket costs me and I'm notsure what that will be until they're purchased. (The qualifying finals were $80 a ticket).
Its a 6.20 game and ill be going straight from work in the city.
- 316 comments
- 17337 reads
AFL Semi Finals
Submitted by chris raff on Fri, 2015-09-18 17:07

- 92 comments
- 7570 reads
Trailer respray
Submitted by dakka on Fri, 2015-09-18 15:34Howdy all
i can use a sandblaster and spray gun at my work, so I want to re spray my boat trailer.what are the steps I should do once sand blasting is done in regards of sealing and painting the trailer what undercoat and paint should be used (silver) any info would be great, it's only a small trailer to fit a 4.3m ally boat cheers
Dakka
- 3 comments
- 2306 reads
Deck wash cuts out
Submitted by jng on Fri, 2015-09-18 05:52hey guys
as as the title says, my jabsco hotshot 6.0 has been playing up lately. It will run for couple of minutes and then cut out, I'll let it rest for a few minutes and then it will start again. Is there an internal overload on these motor/pumps?
Anyone had had a similar issue? I've tested the pressure switch and it tested fine.
Cheers justin
- 6 comments
- 2722 reads
Fyfe MVP again
Submitted by Dale on Tue, 2015-09-15 20:12With daylight to Goldy in 2nd place.
- 20 comments
- 3389 reads
Micro auto filters
Submitted by Hurricane on Tue, 2015-09-15 11:47Hey everyone has anyone else heard of this mob just got a air,fuel and oil filter from them for $40 delivered for my d40 Navara
- 2 comments
- 2127 reads
Ding Dong the witch is dead
Submitted by Dale on Mon, 2015-09-14 20:46Abbott and his mate Hockey gonski and good riddance too. Could have put a chimpanzee against Abbott and I would have voted for it.
- 9 comments
- 3549 reads
Any bricklayers or pavers on here?
Submitted by scano on Mon, 2015-09-14 18:41Hi all
Chasing the info of someone north of the river to do a small brick paving job in beechboro. Got about 6-7 sq metres I need paved. Have the bricks ready to go, really just need the labour and expertise to complete the works.
also whilst I am asking the question on tradesman and bricks. Anyone know of q brickie who is good at building wood fired pizza ovens? In the process of organising the bricks, thermal blanket, render ect. Again just chasing some contact info if anyone has had one built on their behalf before? Planning on laying the concrete slab myself as well as the brick base, the pizza oven is to go side by side with a wood / coal BBQ outside in the backyard.
any recommendations on the above would be appreciated
cheers
Scano
- 3 comments
- 2098 reads



Posts: 147
Date Joined: 25/11/13