Outboard advice
Submitted by deig on Tue, 2021-01-05 14:58
Ladies and Gents
Looking to update our old 2 stroke Mercury to a Mercury 4 stroke and I am settled on the Mercury so don't need ot know how good others are. Currently running an old 135HP mercury and looking to move to either a 150HP or a 200HP due to available stock. It may be a stupid question but if we are currently running a 135HP 2 stroke a 150HP 4 stroke should be fine one would assume? Just don't wantto get the 150 and be underpowered or get the 200 and it doesn't ride right.
Thanks
scubafish
Posts: 962
Date Joined: 15/08/12
What I Would do
Check the weight of the 135hp in kg then check 200hp and what ever the diff put that weight in the eng well(on the transom) and see how it looks and handles before you spend the dollars. If it doesn't work or look good work your way down in weight .
Extra power will always be better than not enough. (not overkill)
http://img.gg/BQ91Sys
Kuz
Posts: 57
Date Joined: 28/02/15
Spot on
Compare weight with previous specs first .
Kuz
Faulkner Family
Posts: 18026
Date Joined: 11/03/08
Check what weight rating on
Check what weight rating on your transom is . Don't want to overload it and not be covered by insurance if something should happen. Bigger isn't always better.
RUSS and SANDY. A family that fishes together stays together
SeperateKnob
Posts: 668
Date Joined: 28/11/16
What year is the old 135
What year is the old 135 Merc?
deig
Posts: 63
Date Joined: 28/08/13
Year
1998
deig
Posts: 63
Date Joined: 28/08/13
Year
1998
SeperateKnob
Posts: 668
Date Joined: 28/11/16
The new 150 will have just as
The new 150 will have just as much power as the old 135 if not more with minimal additional weight. What is the name and model of hull? Need to make sure you’re not exceeding max up
sunshine
Posts: 2600
Date Joined: 03/03/09
They are only 10kg different
A 135 is 452 lbs versus new 200 at 475 lbs .....23 lbs or 10kg difference .....bugger all but what max engine size is the hull rated for
Darren253
Posts: 570
Date Joined: 23/07/16
The 3ltr Merc 150 has torque
The 3ltr Merc 150 has torque like a 175hp anyway... Simple to DIY service and reliable also! Thats would be my choice...
Shark1
Posts: 1086
Date Joined: 21/05/12
i rerplaced 175 2 stroke
i rerplaced 175 2 stroke with 175 4 , and was told go bigger = dont listen to the hype - i gained torque and speed
save the $ on the 150
Backop
Posts: 7
Date Joined: 11/05/19
Outboard swap
I previously did a swap Merc 135hp v6 2 st for the new(ish) Merc v6 4 st 175hp.
Easy swap, close on weight, quiet, jumps out of the hole like a 2 st and great mid range torque without the smoke and much better on fuel. Pushed the old boat from about 42kn to 47kn wot (on damn flat water cause that is quick believe me on a 5.6m boat)..