Hi guys,

Long shot but does anyone on the forum own a Southwind or Souther Star 550WR?

I am chasing some info on max HP on the transom relating to weight etc. Apparently it is rated to 150HP 2 stroke but only a 115HP 4 stroke. 

Any info PM me. 

Cheers. 

Just heard an almighty bang from out the side of my place, went outside to find the entire fence on the northern side of the house is now on the ground. Thanks a lot Mr storm 8 ft sheets of hardiflex ( I think that's what it is called replaced asbestos sheets)sheared of at ground level 6 ft high.
Boat on trailer with brakes on pushed 2 metres down the drive way, wind at falcon registered 92 kph time to batten down the hatches me thinks.

Mega savings sale never to be repeated again. 

Pflueger  Crank Rod -SP1002MH (10-15 Kg) Fuji K Guide Model 

Normally $250 

Our price $200

Sale price $100

Pflueger  Crank Rod -SP902MH (10-15 Kg) Fuji K Guide Model

Normally $220

Our price $150

Sale price $100 

Stocks are limited so make sure you get yours.

 Pulled a couple off an old mark I haven't fished for years , then around an acre of salmon moved in which was alot of fun on jigs

Looking to try something different. 

 Ok here it is.

You go out and nail two Duies within 10 minutes of getting to your spot. 

What do you do, call it a day or keep fishing for your bag? 

My opinion, keep fishing for your bag of other demersals or whatever else, my reason being I'm out to enjoy a day of fishing. 

Fire away!

Hi all

Need a mobile marine mechanic to fit some boat lights.

Any recommendations ( located south of river  )

Cheers

Joycey

Hi all

In today's West we're being encouraged to take part in the first national rec fishing survey in 20 years. The project is supported by the Australian Recreational Fishing Foundation and has some well-known fishing names that also support it. Have aread of the blurb if you're worried this is being collected for anti-fishing purposes.

For anyone interested follow this link: http://www.nationalrecsurvey.com.au/

I'm well into the longer version and it takes a while but you can do it in fits and starts if you want.

 Gday all

With the current regional border closures I cant head to exmouth and have had a couple of trips planned to go there so I'm thinking of heading to onslow instead as I'm in that region can anyone give me some advice on the area it looks like it's a bit further of a hike to get into deeper water is it worth getting out into the deeper water to chase some reds. Are most of the islands good for a look around for a free dive?

Cheers

Rod

media statement which might be of interest if you have pots anywhere in the Rottnest Covid exclusion zone  

https://www.mediastatements.wa.gov.au/Pages/McGowan/2020/05/Recreational-fishers-allowed-restricted-access-to-Rottnest-Island-waters.aspx

 We're back! The shop  has re-open and we will operate in our regular hours, Monday to Friday 8:30am to 5:00pm and Saturdays 8am to 4pm!

Enjoy

 Some time back I read in these post (I think) a fishermans thoughts on conditions that effected sport Hi's words /thought's are about the wind & it's relationship to fish bites We all know of the tidal influences but I think this has been right also : I believe he said East is least,West is best,I have been driffting with no action when the sea  breeze from the west Sth west starts & also the fish any one with thier thoughts please reply as I think some of the old wives tails are still very reliveant .

 Hi all

I have just picked up a couple of alvey snapper winches that I want to use to fish in 200+m of water would you recommend running mono or braid will be mainly used in the deeper water but may also get used in shallower water for kids I'm thinking mono just In case lines cross over at those depths but not sure on stretch with so much line out. I'm thinking 70 or 80lb. What's your thoughts.

Cheers

Rod

 Hi all where would you suggest is the best mounting position for a 1kw transducer on my boat is it ok in the position shown in pic or is there a better spot for it. 

Many thanks

Rod

 https://7news.com.au/lifestyle/health-wellbeing/coronavirus-australia-wa-eases-restrictions-around-gatherings-wedding-recreation-c-999794?fbclid=IwAR0qNdEgFGstY9tPSgwVR2hpt8ZD7LHi6eUN7NXjyOMOefasSf2ymI7yYWQ

Hopefully things keep improving and Rotto gets opened up again soon! 

 There is a channel on Youtube for the Schmidt Ocean Institute and their boat, the Valkor. They run a brilliant submersible called SuBastion, goes to at least 4500m, with brilliant video quality and the ability to manually pick samples. They recently spent some time in Australia, first exploring the Bremer Canyon, then the Perth Canyon, then two of the canyons wide of Exmouth. Some of this stuff was previously unexplored. Staff was a mix of Full-time international operators and scientists and people from the WA Museum, including Glenn Moore. The dives are often long, unedited, and they do highlights for each week. 

Below is a link to one of their shallow dives in the Bremer Canyon. By shallow , I mean starting 330 metres, going up to 184m, along the pateau for a bit,  then back down again, working along one wall of the canyon.

if you want to skip to highlights, 1.41 in you find some fishng gear, a float sitting a couple of fathoms off the bottom. Doubtless attached to lost gear. This had me a bit perplexed, but it becomes clearer later in the video. they keep running across ropes stretched tight across the bottom. 1.50 in you are getting up the rise, and the sponge gardens are becoming brilliant. they find a Southern cray at 1.55 in 220m , a king crab a bit later, but there is a surprising lack of large fish life. But that all changes a few minutes later, get above 200m and the bottom and life is just brilliant. Mostly red snapper and swallowtail, but there is a surprise patch of Terakihi. These are common in Kiwi waters, a type of morwong,  didn't know we had them over here. As they go shallower, the bottom flattens, reef largely disappers, but still the sponge gardens. They find a nice queenie at 2.42 in 184m, then go back over the edge. At 3.00, they find what was attached to those ropes--a plastic craypot. These were widely used up this way chasing snow crabs out on the mud, all strung off a common line, and were easily stackable by pulling the pin. So all that gear was likely just lost lines, snagged on the bottom, and snapped off. You can see one of them actually running under a ledge--this form of fishing is really only suited to the deep flat mud.

Defintely worth a watch.

www.youtube.com/watch

Having just read a post in the "Swan River beginner spots in autumn" post and it had a mention of fishing the canning bridge for bream it brought a smile to my face as I remembered fishing (as a young teenager) for bream off the top of the bridge. Now this was in the late 50s when although it was banned fishing from the bridge it was not rigidly enforced and the traffic was no where near as it is today.

A mate and I would catch various trains and busses up to the bridge arriving late in the afternoon go to the rivers edge dig out some worms and then make our way to the northern side of the bridge on the road way. There you would join the other 10-15 other anglers doing the same thing Your stranded bream gear would be a rod made of Rangoon cane about 6ft long with latest in reels namely an alvey solid wood side cast reel loaded with 20ld mono line going down to a 25lb leader (can't remember the hook used) and a running ball sinker.

About mid evening my mate hooks into a real stonker of a bream, after a couple of minutes he starts to lift his great catch up to the top of the bridge, it is during this activity that everyone holds their breath as many a fine bream has been lost on the way up to the top of the bridge.

The practice then was when you got your fish level with the top of the hand rail you swung it over onto the road way close to the edge and completed the capture, now this worked fine in 99.9% of the time, but not this time.

My mate swung the big bream up over the rail just in time for a car to come close to the hand rail and run over the bream , turning it into a very good size flounder.

It's a very sad thing to see a young teenager coming close to crying and it has staid with me all these years.

Bugger

 Went out last night chasing some snapper, still a bit sloppy so came into Warnbro to drop a line. I noticed some fish coming into the burly that i thought might be skippy. After a couple of goes i managed to hook one, just to discover that they where small sambo's about 5 to 6 inches long. It was a bit of a suprise as it can only mean that  they are spawning in warnbro sound. Has anyone else come acroos schols of the that size ? there were a lot of them.

 Tad untidy this morning.. excututed our plan 

as in too see if there skippy have moved in close

was very quick bag !! Under an hour and it was 

over . A simple pollard and oil doin the trick . 
had a quick squid managed a couple but we 

were trolling the jigs with the wind blowing up ..

cheers fellas .. pirate .. 

So I got a small boat which has a Garmin 820xs purely for maps and a Furuno 627 as sounder powered by a TM260 1kw trannie.

My thoughts are to use the 820xs as my sounder as it is capable of receving 1kw unlike the furuno. I do however like the stand-alone set up though and was thinking of replacing the furruno with a dedicated plotter.

Size is pretty inportant as they both only just fit, the mounting bracket is actually screewed through the perspex. Dose anyone have any good surgestion? Did a google search but nothing jumped out.

Enjoy

HI Guys

We have successfully been squiding in the sound with my 2 young boys, building their confidence and sea legs. Our boat is a 4.75 Savage with 60 on the back

My next question is they are keen to have a fish so looking for some pointers on where to head to, as last week whilst squiding the had a ball catching butterfish on the light gear, but hoping someone can point us in the right direction of possibly some skippy and best place to anchor and burley

Many thanks in advance for your ideas

Anthony

 Hi Fishos,

chasing reccomendations for polish/cutting compound to bring up an older fibreglass hull.

There are places where the glass is looking a bit "milky" & discoloured, so i thought i would spend this down time bringing her back to shiny.

Any thoughts will be appreciated. The easier & cheaper the better. DIY is good for me.

cheers...

 Hey Guys, I am looking at heading to Two Rocks on the weekend. I havent been up that way for a long time, does anyone have any tips?

 Hi everyone, 

After many years of putting up with an inferior sounder I have bought myself a new one! 

I have mounted the new transducer in the same spot as the previous one, Now the problem I have is that I cant pick up the bottom depth or clear picture anything above 7 knots. Under that speed its perfect.

When I look down at the transducer under the swim platform- there is nothing but bubbles and turbulant water.

Is it a matter of moving the transducer to the starboard side further or ideas please?

Just checking before I drill new holes.

Any advice/help would be very much appreciated.

Cheers, 

Darrin

 Guys, i have a Lowrance HOOK 7, can anyone advise if i can upgrade the transduer or where i might find info on upgrading transduers

TIA. Wez

 I'm not one to post many pics of fishing escapades but here is an oldy. 

My Pb Mully.

Solo fishing South oz, last bait for the night ( fresh squid ) and then boom...

140cm - 54 lb

An absolute horse.

Well the R-soles have done it again, Tims Thicket and White Hills closed off again as the idiot brigade once again have trashed both beaches, sand hills cut up and rubbish left everywhere. Why for the love of me are we blessed with dickheads who come and wreck the place, no doubt the same half wits run around on Australia Day with Chinese made flags trying to impress everyone with their love of our nation.