Cray pot tipper
Submitted by Bryce Day on Tue, 2016-10-04 02:02
Well after seeing a few pot tippers on gumtree, most being not suitable for my needs (either to small or to light wall thickness) I decided to knock one up. Only problem was I was at work and cray season is rapidly approaching and I didn't have an ally tig. So I flicked a few drawings to a company to get a bit of a head start. I have to cut the green off the other end so it won't be that long. I will put some pics of the build process up when I buy my new AC tig on Thursday, running full size cane pots so will see how it goes. Oh and one of Hezzys for something different
Image Upload:
Bryce Day
Posts: 812
Date Joined: 01/06/15
Knocking up the bushes
Knocking up the bushes
ChrisG
Posts: 558
Date Joined: 30/12/11
Looks like a ripper mate
Looks like a ripper mate
Rick
Posts: 1112
Date Joined: 22/12/06
Quality
Looks good mate, will make life a bit easier I'm sure
PGFC Member
Bryce Day
Posts: 812
Date Joined: 01/06/15
Capstan motor has arrived!!!
Capstan motor has arrived!!! Time to hop on lathe and make a capstan drum. Well just had the tipper dropped off works a treat. Didn't buy ally welder in the end. Will stick to stainless I think!
Bryce Day
Posts: 812
Date Joined: 01/06/15
Just needs the rubber to
Just needs the rubber to stop the scratches and I'm away
Deleted
Posts: 6265
Date Joined: 26/04/14
There's no saying you do
There's no saying you do things in halves.
Looks like it'll lift small boats over the side
Adam Gallash
Posts: 15644
Date Joined: 29/11/05
Yup
Those 3kw of trannys should get the crays nicely par boiled by the time they get to the top too. Winning.
Site Admin - Just ask if you need assistance