Fishing Discussion

General Fishing Chat

Skipp mission

Great when a planned fish comes together..

a stop off at bcf too grab some prawns and

berly ! 3 bags of prawns and pollard n oil

hundred dollars later ! Lol !! We set up for

herring !! Only too have my deckie  nailed by

a good skipp !! We swapped for a little ball

sinker ! Too get our little prawn baits too

waft down nicely ! Rest was history fellas ‘

pinned a few squid too finnish off,. !

Cheers pirate ,, 


FAD program

Interesting article in today’s West Australian for anyone who fishes or has been thinking about fishing the FADs off Perth.

 


Derby

 

Who is hosting a Derby BBQ??

Our collapsible fire pits would make an excellent addition

You can have a full eagles pit, a full dockers pit or if you are a divided household you can have a half and half. One eagles plate and one dockers plate.

Full designed pits are $145.00

The pits are 500w x 500d x 400h and made from 3mm steel

Once you are finished, the fire pit can be collapsed into 5 pieces for easy storage.

Follow us on facebook:- Amek Custom Fire Pits and Designs

 

 


Friday Funnys

Enjoy


Rule of thumb for weather conditions in Perth

 Gday people, just moved down to perth from darwin and looking to suss out the weather to head out for a fish. The rule of thumb for up north was under 10kn and .5 swell would be good conditions, is there a similar rule of thumb people go by for down here? Ive got a 6m joshua boat sports fisher which like most ali's tends to slap about in anything other than slight chop but it has routinely been 70k offshore up north when the conditions are right. I would be looking to head out the back of rottnest up here so any help to suss what weather is needed for a safe trip out there would be appreciated.

Cheers


Ocean Reef Leading Line

Will the leading line be fine with a 3m swell. Thinking of hitting it in the dark on Saturday to fish the 3 mile. I've gone through the Hillarys' GAP up to 2.5m but think I will give Saturday a miss going through the GAP with predicted swell size and use the leading line. Very harry in the dark.


Anyone around Point Samson 5th -15th August?

I’ll be at Point Samson from 5th - 15th August, is anyone else up that way around same time? If anyone is looking to get out fishing I may have a spot on my boat. 


Simrad GO7

Hi guys,

 

Just purchased a boat on the weekend which is fitted with a Simrad GO7 GPS/Sounder. I was hoping someone with the same or similar sounder might have some advice on what manual settings to use to get the most out of the sounder. I generally fish in the 40m range for dermersals.  Any help would be much appreciated.

 

Cheers,

Mitch 


Mayhem in the skippy hole this arfo

 Went out with young Gareth at 2 pm, bit of burley time and it was on, skips were smashing bigjohns micro bucktail jigs, best waz  63 cm on bait, they never stopped and we left em biting, back at the marina at 6pm. Could'nt get a bait down for a pink.

 


Want to Buy Ali centre cab up to 7M

I am looking to buy a 5.8 -7m Ali centre cab, just seeing whats available. Im paying cash and Im ready to buy. I live in Karratha but I am willing to travel for the right boat.


South passage

South Passage Coral Bay.

Deff not the biggest we have faced but bit more than I normally like to tackle with punters onboard.

There was only about a 2m swell running and looked fine all the way up to it till the set turned up.

Video in link

 

https://onedrive.live.com/?authkey=%21ACNUi9u9GHGXYRA&cid=605428A2A19E8A3C&id=605428A2A19E8A3C%21111&parId=root&o=OneUp

 


lowrance 10 hds gen2

hi is it possible to run a amar t560 with hds 10 a gen 2 lowrance and what would the settings be , i have tried for 6 years to get it to show fish arches , it will show perfect bottom and blobs where mabe fish are , transducer settings have been altered many times, at present transducer is 3deg forward from flush,amar t560 is the current settings,any help greatly appreciated===thanks


Flares

 Guys ive Cocked up and just arrived in denham Sharkbay with out of date Flares F$#K. Does anyone know if they can be purchased in denham as asking at the servo and some other places no one seems to know . cheers in advance from an rushed idiot.


Anyone lose a boat?

Ocean Reef and Lenore Rod intersection


chopper rescue north of busso tonight

just been following the rescue chopper flight after it went over the house a while ago tonight

looks like a rescue under way north of busso out wide in geo bay ..

hope anyone involved comes back in ok

https://www.flightradar24.com/data/aircraft/vh-epk/#2112a971

https://www.flightradar24.com/data/aircraft/vh-epk/#2112d45c


Friday Funnys

Enjoy


monkey mia fishing advice

 Hi guys , off to monkey mia this weekend...   Just wondering if anyone has been up lately and if so how was the fishing. Have seen some videos of guys trolling of monkey mia somewhere catching mackies...does anyone know where would you go,what depth etc.....only been there once and that was only for a day or two..didnt have much luck...are up there for 2 weeks this time...


Perth to Abrolhos by boat

 Hi all trying to organise a trip to the southern group Abrolhos next April but will have to head up by boat as boat not on a trailer (C35) just chasing any info I can get from anyone who has done the same trip ie where they stoped for fuel Jurien or dongara , best spots to get mooring or anchor with a bigger boat  and roughly how it whent . 

Thanks


Rain water in boat.

 I keep my half cabin boat raised and fully covered by a water proof boat cover. But after it rains I find about 3 ltr of water pooling inside, down the rear of the boat.The boat is utterly covered and there are no holes or tears or anywhere the rain can breach the cover... how is this happening?


Yamaha 70HP 2 Stroke Prop dimensions

 Hi Guys,

I have no idea about props so am seeking a bit of advise. 

I need some info on what dimensions/ pitch or whatever its referred to.

The engine is a 70HP 2 stroke outboard. It's a 2008 model if that helps?

 

Cheers for any help. 


Dawsville Cut

 Hi, I would like to take a couple of my grandkids, to fish in the inlet and Dawsville cut, I have a 5m Quintrex, and will launch at dawsville, does anyone here fish in and around the cut, and is it worth anchoring in the Cut and what fish do you catch, I have not been there before.

Thanks Mal.


wheres good for herring

 Where abouts is good for herring in perth


Nornalup inlet snapper

 Hi Every one we are heading to Walpole this weekend for 4 days fishing is the size limint of snapper in the inlet 500 ml can not seem to find any info on it 

Thanks 


Diawa Saltiga parts

 Guys, anyone give me a pointer for purchasing parts for my Saltist 4500 reel. My bail arm broke & i was trying to purchase from Japan, but the price they were charging, after i paid by paypal, was over $380.00 ( FOR A FUCKING BAIL ARM), so i have obviouisly cancelled the order, but don't want to leave my reel broken, it is too good.  TIA

UPDATE, thanks for the heads up, i am now sorted


Chinese Import hulls

 Has anyone purchased a chinese import hull from Gospel Boats, Wildsea or Acco Boats? If you have could you please share your experience. I know their is alot of opinion on this subject but I am after first hand experience.

 

Cheers


Furuno gp1971f

Just wanting to know if anybody has got or use 1 of these units. If so are they any good? Currently running a raymarine axiom 7. But I don’t really like the sounder and it’s not able to run a 1kw transducer. Is the sounder any good on the 1971f? Cheers 


bait board live bait tank combo

 Looking round for one these to install on my voyager. Just wondered if any one has any ideas?

Thanks for any help


Collapsable Fire Pits

 

Hi Guys,

I recently started making a few of these collapsible fire pits.

Made from 3mm steel, 500w x 500d x 400h. Once you are finished, the fire pit can be collapsed into 5 pieces for easy storage.

Perfect to take camping or for your backyard. A standard from bunnings grill can also fit on top for a perfect BBQ cook up.

Currently I have most AFL teams, car brands and a few fishing outdoor designs available.

Custom requests are possible but a minimum $50.00 drawing fee is required and restrictions do apply.

 

Designed fire pits are $145.00

Pick up local metro

Big thanks to Adam for permission to get them out there 

 

You can see more at our Facebook page - Amek Custom Fire Pits and Designs

Contact me on 0490 503 966

Email -

 

 


Aluminium Trailer

Hi Guys,

 

Looking for advice on where to go to purchase a new ali trailer for a 6.5m Fibreglass. Are based in the South West but happy to shop around.

 

Cheers Steve


Friday Funnys

Enjoy