Any opinions on the all steel collapsible cray pot ?

Looks like a good option where you need the space on the deck ?

 Hi all

Are there any ford car salesmen on here the father inlaw wants a ranger xls auto with about 10k of add ons he wants to buy this week. he will be trading in a patrol also and ford have offered him 13k for it. Just wanted to see if we can give the business to someone on here. He is located in golden bay but will travel if he can get a better deal.

Cheers

Rod

Hey all, fly home from work tomorrow arvo and have 4days off.Happy to chip in fuel bait etc. Havent had a jig for about 9months and startimg to get an itch. Located in belmont but happy to travel anywhere from freo to yanchep. Have some experience with demersal and sambo jigging and happy to fish for what the captain wants. A days notice would be great ill have to go buy a rod for the day. Pm me for contact details

Cheers 

Sha 

 Just wondering how everyone is travelling business and work wise at the moment after the start of the year when it all went to shit. We have actually picked up immmensely and are flat out, I'm actually considering taking on an apprentice, maybe someone a little older. Have picked up two new clients and one has the contract for all the Coles maintenence around town. The oil and gas side of things is still just a trickle but the completeions side of things are busy so that's keeping us busy on that side of things. So how are the rest of you fairing?

After getting in a bit late on Wednesday night and not looking forward to cleaning the fish, we left them in the shed in the MadFish cooler bag with 2 bags of ice.

24 hours later, most of the ice still there, fish perfect for filleting.

Great product.

 Just had this popup on my tablet, I dont trust it, but it could be legit. Does anyone know for sure? I had a little giggle when it popped up.

 Planning for a beach fish anywhere north of Burns beach. have not been for a while so any reports of what's being caught would be appreciated. Looking to target tailor and Mullas in the evening. have 4WD so all options available.

Got them in an email not long back, these ones are the best of them

Adam Goodes I really wish he hadn't started diving in the last 2 years of his stellar career , personaly I think he was right in pointing out he was racially vilified by a girl . However it wasn't that led to the booing it was his diving for free kicks that caused it .
Adam would not have coped if he played 25 years ago , I heard jimmy and phil krackour copping far worse than adam ever got and yet they coped not saying it was right but they managed , Maurice Rioli was never booed by opposition supporters the actually politely clapped his efforts , why because he never took a dive

Hey guys, 

Will be heading up the denham over the 2nd week of school holidays and its my first time up there so just after some general info on whats are the things to watch out for regarding weather. I will be taking a 7.5m boat up. Have done some research and most says its not the best time of the year weather wise, (not leaving the boat behind) 

Just after some general info regarding things to look out for when the winds are up etc

Planning to do most of the fishing out of monkey mia ive done some research and some guys are saying its more sheltered on the monkey mia side? can some one confirm this? as i will be taking up my little 3year boy and the missus. 

Which side do guys prefer to fish monkey mia or denham ie wind directions etc.  obviously if its to windy the boat stays on the land. 

Any info would be greatly appreciated!

TIA Justin 

 Can some one please help me out. I wanting to make a storage compartment for the back of my 4WD. Fairly simple design. Top will be 1080mm (D)x 1380mm (W) O/A made in 2 havles for easy removal, locked down with recessed latches. Base will be 950mm (D) x 1010mm (W) with a centre partion. Frame 20 x 20 tube, top sheeted with 5mm and base sheeted with 3mm. I have full drawings and dimensions of components. I'm more than capable of fabricating this with a bit of assistance obtaining the material and with welding as i do not have access to a aluminium welder. All expenses will be paid for. I'll be back in Perth 6th October would be great if could sort something out between now and than. Cheers Wes.

Ok.  First up.  Which freo supporter, or at least non hawthorn supporter (willing to support freo on the night) wants to come to the game on friday night with me.

I will be be buying two tickets tomorrow morning but my wife has injured her knee and wont be going.

Cost will be whatever the ticket costs me and I'm notsure what that will be until they're purchased.  (The qualifying finals were $80 a ticket).

Its a 6.20 game and ill be going straight from work in the city.

 Howdy all

i can use a sandblaster and spray gun at my work, so I want to re spray my boat trailer.what are the steps I should do once sand blasting is done in regards of sealing and painting the trailer what undercoat and paint should be used (silver) any info would be great, it's only a small trailer to fit a 4.3m ally boat cheers

                   Dakka

hey guys

as as the title says, my jabsco hotshot 6.0 has been playing up lately. It will run for couple of minutes and then cut out, I'll let it rest for a few minutes and then it will start again. Is there an internal overload on these motor/pumps?

Anyone had had a similar issue? I've tested the pressure switch and it tested fine.

Cheers justin  

With daylight to Goldy in 2nd place.

 Hey everyone has anyone else heard of this mob just got a air,fuel and oil filter from them for $40 delivered for my d40 Navara 

 Abbott and his mate Hockey gonski and good riddance too. Could have put a chimpanzee against Abbott and I would have voted for it.

 Hi all

Chasing the info of someone north of the river to do a small brick paving job in beechboro. Got about 6-7 sq metres I need paved. Have the bricks ready to go, really just need the labour and expertise to complete the works.

also whilst I am asking the question on tradesman and bricks. Anyone know of q brickie who is good at building wood fired pizza ovens? In the process of organising the bricks, thermal blanket, render ect. Again just chasing some contact info if anyone has had one built on their behalf before? Planning on laying the concrete slab myself as well as the brick base, the pizza oven is to go side by side with a wood / coal BBQ outside in the backyard.

any recommendations on the above would be appreciated

cheers

Scano

Was put onto Perth beer economy on Facebook the other day, everything that is for sale is in alcohol amount - no cash.

I noticed that if want the item - you must say sold and if you don't ask questions first, you miss out.

Not sure if many of you guys have heard of it, but you have to be damn quick to get something.

 Poms 5/72 with the captain retired hurt. Hope we can put it together with the bat.

 Hi guys

Just about to purchase a new Navionics card and am trying to decide between Gold and Platinum plus

Platinum plus is cheaper but covers less area

What other useful functions does Platinum plus have over Gold

Posted here instead of in Sounder area due to more traffic

Cheers Katman

Hi all

I usually carry a 12V/ 17 amp hours 900 amp battery jump starter pack in the boat as a safety measure in case I have issues with my dual batteries, and have been thinking about the actual usefulness of it lately as I haven’t had the need to use it as yet, touch wood.

The main questions/ concerns I have are:

-       Would this model pack have enough “kick”to start my Yammy 150 if the other batteries did die for some reason?

-       If I did have to use it, should I connect it to the battery itself or unhook the batteries and attach the alligator clips straight to the battery leads?

-       Is there any potential for doing damage (major or minor) to the outboard (fuses/ computer etc) if I were to use the pack?

-       If not enough power to start the outboard, I assume it would still give me enough charge to make radio calls to other boats/ sea rescue etc? Would obviously turn off all other electrics- sounders, gps etc before trying this

Thanks in advance for any answers you guys can give

 Hey guys can any members recommend a good mechanic north of the river that really knows his stuff on Toyota landcruisers. Will be for general services and repairs. Cheers in advance

Fellow Fisho's. I witnessed one of those professional type 8 prop drones plunge into the drink just off the car park area at Woodman Point this afternoon, about 1:30pm Wed 9th Sept. We asked a jet ski owner to have a look but he could not find anything. The electronics and camera will be wrecked but the owner is pretty keen to get it back and salvage what he can. If anyone drags it up on a squid jig or snapper line can you please drop it off with the Cockburn Sea Rescue guys as they have the owners contact details. Thanks

I tried the stealthy look to sneek up on the fish today unfortunately it didn't work ended with a good feed of squid but

 Ive just had a z6500 saltiga, a 5500 saltiga and a 6500 saltiga in for what i thought  would be a nice service but  turned into needing full rebuilds on all three reels.My thought is why the f#@k am i spending big dollars  on reels for them to need full rebuilds after they get a few fish i thought thats why we spend $1200 on a reel so we dont have to spend again,I can understand the z6500 getting rebuilt because its 8yrs old and it has caught alot of good fish compaired to the other 2 that are 2 and 3 yrs old  and barely see the water as much as they should. To say the least i am very pissed off and starting to think i should have stuck with my stellas. Whats your opinion should i have the shits or is this exceptible from a saltiga because im starting to think it might be if all three needed the samethings replaced. 

 Im heading back up to Carnarvon on Wednesday for a couple of weeks for work and my missus is flying over east to see her family while im up there so i need to put my dog in a kennel while im away. My dog is a female bull mastiff / lab 3 years old and 30kg. Any kennels anyone recommends or to stay away from? Thinking of Perth Boarding Kennels in Banjup for $21 a say.