I am looking at making up a fiberglass battery box to fit into this space in the floor. Can anyone out there tell me whether this shoulder in the bilge is structural, or have any importance to the integity of the hull. I think its where the front engine mounts for an inboard were attached. Can it be cut away?

The area is aft of the fuel section, between that section and the transom. Any picutures or info would be appreciated.

well after my second gme crapy radio died i want something decent that will last

ive narrowed my choice down to the sony approx $350

http://images.sonicelectronix.com/images/412387/big/cdxh910ui.jpg

or the  kenwood approx $280

http://img.auctiva.com/imgdata/8/5/1/4/6/7/webimg/289432067_tp.jpg

any thoughts on feedback on either ??

Hey guys,

Just wondering if anyone knows where to get those self fit rocket launchers from? I know they don't look the best but i need to get the canopy retrimmed anyway so I was thinking of getting it incorporated into the rocket launcher, would probably look a lot better. I would get some made but i'll be getting a new boat next year.

Cheers!

Pete

I am just upgrading the engine on my 670UB Banana Boat to a fuel injected 100hp 4 stroke, from a 90 yam 2 stroke.

The dealers say I will get 30 to 50% savings on the fuel by comparisson.

My mate shomby has the same boat and engine only his is a carby model, his rule of thumb with the fuel is when doing 20 knots its 20 litres per hour, 30 knots 30 litres per hour. Will there be much difference with the fuel injection to the carby model?

Has anyone got the same set up? what prop size are you runnning, Chivers marine say the standard prop works well, an opinion from another owner would be good.

The model I am gettingfitted is 06 it has not got the nema 2000 so cannot hook it up the my HDS 7 so am fitting a Lowrance fuel flow sesor and memory modual, Luke chivers has set up boats with this system before so I will be able to program tank size, and get all the data up on the screen, how much I am using, how much fuel is left in tank etc, great for monebello abrollos murian trips. With the old 2 smoke long trips were scary.

The stainless fuel tank that came with the boat cracked once, this has now been welded up and is sound. although for piece of mind was wondering if fibre glassing around suspect seams in the tank would be sufficient reinforcing. the last thig i want on one of the above trips is the tank splitting on me - fire, tow back to port, death, come to mind, haha.

all opinions and comments appreciated

thanks

Justin poole

Hi guys looking for a company that does boat detailing / polishing of fiberglass boats, mobile service that can also fix the odd chip in the gel coat.

The cat is starting to get a bit of yellowing from the sun on the top sides. So if anyone has had a good experience with a company please forward there number.

Also what sort of price am I expected to pay?

Thanks in advance.

Hi guys,

Just a quick note to let you know that at this years Perth Boat Show, Commodore Marine will be releasing a new range of 15 foot boats (4.5 meters).

They will include a Runabout, Center Console, Side Console and a tiller steer dinghy.

All these models will have a moulded floor, underfloor storgae/kill tanks, foam filled, rod holders, under floor fuel tank option and side pocket storage.

All will be under $23000 as a boat , motor (40hp 4 Stroke), trailer package and the dinghy under $20,000.

Drop by and have look when the shows on and if any fishwrecked members want to consider one for themselves before or at the show I will include a safety pack to get you straight on the water, valued at $750.

Cheers

Gotta love the floatation of Boston Whalers!

just wondering what the weather is like in that area now and for the next week

not for fishing

i just wanted to know if it was raining because i want to go to the dunes for a look and maybe a sandboard

Hey Guys,

Any idea on a ballpark figure i'd be looking at getting privately for the above outboard with less than 70hrs on the clock?

Cheers,

Sam

.

I have a 1997 evinrude 150hp 2 stroke.Yesterday travelling back from the ffb the conditions being so good i opened her up full throttle getting up to 38 knots.Then the check engine alarm sounds and then goes off with the motor not missing a beat.Does anyone know of this to be common if not what sort of faults should i be expecting or looking for.I know this is a very broad question but i am definately not what you would call "mechanicly minded" so any advice would be helpfull

cheers

Just bought a "new" second hand boat but needs canopy/side clears plus pole work.

Anyone have any work done that they would recommend ?  Pref  North of River but happy to go south if they are good quality. 

Hi guy's i know this subject has been posted before

                                                                          But it was some time ago and maybe there is a bit more information around now on these hulls.

Looks like i have a buyer for my other boat (which will be sadly missed, but looks like it will be going to a good home) so i am checking out new hulls.

The ocean whaler has caught my eye and if any one as any info to share on these it would be greatly appreciated.

Good bad or indifferent all info is good info.

Would be looking at the 565 with a 115 e-tec.

Cheers POC

                                                                                                        Would hope they would cusion!!!!!!!!!!!!!!!!!!! 

Not long before a boat ends up in our drive way.

I'll need to get a few things done. Just wondering if anyone can recommend a company out there that can fit a plotter, VHF, another battery & isolator etc.

Holes will need to be cut out for some items & I want to be confident that the job will be done in a professional manner.

Appreciate some input.

Daz

Getting close to purchasing a second hand boat, however, I may need to budget for Stamp Duty.

Does anyone know whether duty applies to used marine craft & if so, what rate applies.

Thanks,

Daz

I need some help with an aussie whaler 5.5. can any one tell me where the bilge pump is located in the hull? and is there a way to access it without pulling the hull apart?

Cheers

Hi all, I`m upgrading to another GPS plotter and for my price, the available ones are:
1. Lowrance HDS 5m
2. Lowrance Elite 5m
3. Garmin 551

All are $850

I think 1 and 2 are similar, if not the same. Garmin has preloaded map in it, and I think the lowrance may have. Lowrance have a greater pixel count @480.

Any one out there who can give me the heads up would be great.

Thank you

Chris

Guys, in need of some advice regarding bilge blower on my sterndrive. (tried a search but didnt get much)

The engine is a merc 350 MPI Horizon. I have been running the bilge blower whenever the boat is in use. a couple of minutes before it is started and then throughout operation.

I have since been told that I dont need to run it after the motor has been started. I am always cautious regarding the build up of fumes etc in the engine bay so, whats your thoughts.

Cheers

Kev.

Hi all,

Been thinking about upgrading the tinnie for a while now and the wife is starting to warm to the idea. Hadn't contemplated buying one much before but I saw a nice Polycraft down south not long ago. Have done a bit of looking around on the net and something that matches the description below would be up my alley.

spend up to $15,000

length = approx 4.5m or so

type = centre console

For that sort of money should be able to buy something about 5 years old with a 4 stoke engine. Just wondering if anyone on here has a Polycraft themselves or been out on one from time to time? If so any info you could share would be great.

Always good to get the opinions of others prior to going to do some serious shopping!

many thanks for any info provided

Scano

about to start removing the floor any tips or things to watch out for??

Does anyone know if theres a product that can help eliminate some of the scratches that the screens can get from cleaning them, i have a few very fine swirl marks that i would like to hopefully remove?

As a few people were aware i had some issues with my engine the 2nd last day in Exmouth.

Came back and sussed a few things out and realised it might have been a gearbox issue, so after speaking to the guys from men on boats with some advice and help, we worked out that the engine was still under warranty as they changed the warranty over from 3 to 5 years 6 months before this particular engine was purchased.

Phew what a relief..............so put onto John at Dinghy world and recieved top service, every promised phone call was made, all the follow up calls etc and time frames were kept.

Once we sussed out a tooth on the forward gear they were in immediate contact with honda who said yeah no issues we will fix it, but instead or repairing the gears etc just replaced the whole gear box with a BRAND NEW one, and upgraded from the original one in the boat.

No issues at all and 110% satisfied with Dinghy World and especially Honda for coming to the party big time with this.

Was apparently around 7 grand worth or repair done on the engine.

So if anyone was thinking about a new engine, they have a great warranty and aftercare.

Personally when im in the market for another engine i will be buying Honda again.

Spoke to somebody today who said crossing your trailer chains was illegal and he knew someone who was fined.

I personally thought it was the other way and always cross them.

What do others do?

Hi all.

I was just wondering what your general thoughts on those inflatable boats are? I would like to get on the water but I am not rich enough to get a dinghy and mainly don’t have room to store it. So I thought that something like the one on the picture might get me little bit off shore (like Cockburn sound, Lancelin bay and similar calm places). Is it a good idea with a little outboard or will it sink straight away? :) Has anyone had one of these?

pulld up a couple of hatches in my hull and wondering what these are??

I have brought myself a 5.3 douglas craft cuddy cab and need some direction on where to find info on glassing and alike so anyone who has taken on a project let me know of any books/sites or info you would like to pass on.

cheers

Have been reading up on jacking plates.
Both manual and hydraulics.
Seem to be a few advantages with them.

Any one had one seen one or know anything about them first hand?

Cheers POC

Gday,
I've recently been given a boat by my old man.
He doesn't use it and I'm moving to the coast so he has given me his.
The only name/make I can see on it is Delta.......does anyone know anything about them? Where they were made....are they still making boats?
Any info good or bad would be appreciated.

Cheers

*